-
Posts
3,303 -
Joined
-
Last visited
-
Days Won
97
Content Type
Profiles
Forums
Calendar
Everything posted by lupogtiboy
-
If anyone needs to order this gasket set, it is priced at £12.91 inc vat per side, it's currently on factory backorder but available in Germany
-
Fuse 30 Circuit on GTI
lupogtiboy replied to Chris-M's topic in Car Care, Maintenance and Mechanical
They are both powered by the same fuse, along with the camshaft actuator -
Fuse 30 Circuit on GTI
lupogtiboy replied to Chris-M's topic in Car Care, Maintenance and Mechanical
Usually on these plugs, you push the connector towards the thing you're trying to disconnect it from, push down on the little tab, then pull it away from said sensor. Image shows the plug. Don't use a screwdriver as it will snap off the lug should you ever want to re-connect the plug in the future. -
Lupo GTI No3 - New interior - heated anni recaros
lupogtiboy replied to Greig's topic in Member's Cars
Welcome back to Lupo GTI ownership! I have to disagree about the high level brake light though, the GTI spoiler light is only fitted to a GTI, a non-GTI light is the same though.... Have you got anymore details about the auto-headlight kit you fitted? I have one fitted to my car, but it's not app controlled, that sounds interesting! -
You can't get the OE ones from VW anymore, long obsolete, but you could buy a sheet of 3A0 867 201 H which is a similar material to the Lupo one.
-
I've had the autolocking/unlocking and the alarm chirp switched on my gti for years! Beeps once for lock, twice for unlock. I also have it set to unlock the drivers door on one press and the rest on a 2nd press within 3 secs.
-
Do you have the correct bulbs in the tail lights? They should be twin filament 380 bulbs and they should only fit in the holder one way, I've loads of cars where people have used the correct bulb but fitted it wrong. The 380 bulb has 2 pins, one is slightly higher than the other so that they fit in the holder in one place. So it could be that someone has fitted a single filament (382) bulb where there should be a twin filament, that can make the car do many odd things!
-
It's obsolete from VW now but the part number was 6X0 803 550 A and should look like a metal bar as shown in yellow below
-
There is a Philips head screw on the bottom at the front, not sure if I'd be brave enough to take it apart though! It would look amazing with LED's added to the front and rear lights I reckon.
-
I guess I'm in a good position to comment on this! I have a Janspeed cat-back exhaust on my Lupo GTI, not the huge tail pipe version either, exhaust note is perfect, not too loud that it gives you a headache, but loud enough you know it's there. The bore is the same as factory so it doesn't damage any of the back pressure you need, the fit was perfect and was worth every penny of the £350 I spent buying it. I also have a 2019 Up GTI in Tornado red, to say it has no character is doing the car a huge discredit. Sure it's no Lupo GTI, but the car has bagfuls of charisma and I'm loving every drive out in her. Handling is fun, performance is more than adequate, and I'm hoping to remap her soon for around 140ish bhp, plus with an induction kit from Forge Motorsport, I'm hoping for 145-150bhp, which is more than enough for a car of it's size. I highly recommend it!
-
Mines 796 of 1500 if I remember right
-
I think mine may arrive today! Finger's crossed!
-
It will need to be turned on with VAGCOM/VCDS
-
G13 is the current VW coolant for pretty much all VW branded vehicles, part number G 013 A8 JM1 £12.72 inc vat for 1.5 litres And yes, coolant is added via the expansion bottle
-
It does look a little big to me too. I've been running this badge on mine for years, it's from a MK2 Golf GTI 10th Anniversary Edition, I found it at VW Spring Fest years ago, think it looks great! Might be hard to find now though....
-
VW502/00 is 5w40 oil for fixed service schedule so I'd stick to that
-
Which is fine until MOT time when it will fail for not having a catalyst fitted I'm glad things are on the mend with this car, it's nice to see a GTI being restored rather than stripped and sold off
-
I like the way it says its an 'improved' version of a Skoda 1.3, how can reducing a 1.3 to a 1.0 be classed as an 'improvement'? OHV engine too! Wow, not seen that since my mates mk2 Fiesta 1.1!
-
I've been running various brand 195/45 r15's for years and had no issues what-so-ever, Uniroyal Rainsport definitely the pick of the bunch though
-
Lupo GTI - Under bonnet fuse holder bracket
lupogtiboy replied to steve200's topic in Volkswagen Lupo
Part number 6E0 971 501 D £37.18 inc vat, on back order -
That is looking stunning mate!
-
Just read all of this, glad to see you're keeping the Lupo game going! On another note, if the n/s wing you bought is a reflex silver one, I have a moon silver one on mine I'd be happy to do a straight swap with you?
-
032 103 601 QA £156.77 inc vat from VW. Currently on factory back order so expect at least a 10 day wait for one....
-
GTI engine undertray/skid tray
lupogtiboy replied to skyetom's topic in Car Care, Maintenance and Mechanical
6E0 825 235 L for anyone who's interested, £192.68 inc vat from VW!