Francis Posted February 13, 2009 Report Share Posted February 13, 2009 Heyy peoplee im boardd so i thort i make this topic .. ..How low is your lupo/arosa/anything? ? Put How low its been lowerd .. The coilovers you useed .. how much you payed if you want ?and a picture Would be nicee and any other info you want to put . Thank x Quote Link to comment Share on other sites More sharing options...
Mr loopy Posted February 13, 2009 Report Share Posted February 13, 2009 LOW 110mm i think no rear adjuster and there v-maxx Quote Link to comment Share on other sites More sharing options...
treblet Posted February 14, 2009 Report Share Posted February 14, 2009 (edited) The single most definative answer to your question is...NOT ENOUGH!!!! Edited February 14, 2009 by treblet Quote Link to comment Share on other sites More sharing options...
little rich Posted February 14, 2009 Report Share Posted February 14, 2009 umm im on the old TA TECHNIX the rears are all the way down and the front has another 15mmon the tramontson the mattigs(same lowness on both as there the same size wheels and tyres,)Rich, Quote Link to comment Share on other sites More sharing options...
SC02 FFF Posted February 14, 2009 Report Share Posted February 14, 2009 (edited) LOL im joking, that was my reversed onto a friends drive glad i didnt have my Cupra splitter on then but saying that it takes a beating anyway.i gone lower at the rear now and possibly on the front il need to measure Edited February 14, 2009 by SC02 FFF Quote Link to comment Share on other sites More sharing options...
heartagram Posted February 15, 2009 Report Share Posted February 15, 2009 Parking your car on a level bit of ground and measuring it against a uneven gradient doesn't really count. I dunno why people do it. Quote Link to comment Share on other sites More sharing options...
Silver! Posted February 15, 2009 Report Share Posted February 15, 2009 Parking your car on a level bit of ground and measuring it against a uneven gradient doesn't really count. I dunno why people do it.Ditto! Quote Link to comment Share on other sites More sharing options...
SC02 FFF Posted February 15, 2009 Report Share Posted February 15, 2009 Parking your car on a level bit of ground and measuring it against a uneven gradient doesn't really count. I dunno why people do it.whos done that?Parking your car on a level bit of ground and measuring it against a uneven gradient doesn't really count. I dunno why people do it.whos done that? Quote Link to comment Share on other sites More sharing options...
Boy'dup Posted February 15, 2009 Report Share Posted February 15, 2009 whos done that? Quote Link to comment Share on other sites More sharing options...
LiamD Posted February 15, 2009 Report Share Posted February 15, 2009 pwnd. might as well just post a picture of your car in a grassy field! Quote Link to comment Share on other sites More sharing options...
Boy'dup Posted February 15, 2009 Report Share Posted February 15, 2009 even this looks slightly lowered from this angle but i can assure you thats standard ride height Quote Link to comment Share on other sites More sharing options...
LiamD Posted February 15, 2009 Report Share Posted February 15, 2009 Here's some of my old one in various stages, so you get an idea.Weitec 60/40 lowering kit. 15" wheels on 195/45 tyres.FK Coillies with the adjusters in the back, lowered quite a bit at the frontAdjusters out the backFilled full of **** to provide the reverse rake effect Quote Link to comment Share on other sites More sharing options...
Benny Posted February 16, 2009 Report Share Posted February 16, 2009 Getting there, may need to find a bigger kerb? Quote Link to comment Share on other sites More sharing options...
treblet Posted February 16, 2009 Report Share Posted February 16, 2009 Getting there, may need to find a bigger kerb?Is that actually lowered at all?I don't think mine would clear that kerb, I wouldn't try to find out anyway! Quote Link to comment Share on other sites More sharing options...
SC02 FFF Posted February 17, 2009 Report Share Posted February 17, 2009 (edited) rich has to be one of the lowest lupos i've seen, my suspension at the back if i went over a bump realy hard would hit bump stops now lol Edited February 17, 2009 by SC02 FFF Quote Link to comment Share on other sites More sharing options...
Little Green Giant Posted February 17, 2009 Report Share Posted February 17, 2009 pwnd. might as well just post a picture of your car in a grassy field!a new one! down as low as possible at the front, without taking the adjuster springs out, which will happen! so currently 100mm?rear, without adjuster blocks, but still plans to go lower. 13" wheels, rears 165/55 fronts 155/70. Quote Link to comment Share on other sites More sharing options...
Benny Posted February 17, 2009 Report Share Posted February 17, 2009 Trying to get lower but need some rims badly! Quote Link to comment Share on other sites More sharing options...
seaneightynine Posted February 17, 2009 Report Share Posted February 17, 2009 I cannit run eggs over like, ...well eggs standing upright anyways! hahaha Quote Link to comment Share on other sites More sharing options...
deathhead Posted February 20, 2009 Report Share Posted February 20, 2009 Good old vmaxx, as low as possible at back with adjuster block etc out, and about 15 mm left on fornt running 13's. Quote Link to comment Share on other sites More sharing options...
DarkStryder360 Posted February 26, 2009 Report Share Posted February 26, 2009 .... Yes its not ruddy low enough! Quote Link to comment Share on other sites More sharing options...
akbarirfan Posted March 1, 2009 Report Share Posted March 1, 2009 Trying to get lower but need some rims badly!Dude how are low are you?I want my car looking like this, it is black with those caps too! Quote Link to comment Share on other sites More sharing options...
Benny Posted March 2, 2009 Report Share Posted March 2, 2009 Dude how are low are you?I want my car looking like this, it is black with those caps too!I'm not really sure, it's got TA Technix coilovers with the rear adjusters out.I'ts no lower than alot of the beasts on here, I think it's because of the steels it looks low!Do it! Quote Link to comment Share on other sites More sharing options...
Little Green Giant Posted March 2, 2009 Report Share Posted March 2, 2009 just go as low as you can! Quote Link to comment Share on other sites More sharing options...
Benny Posted March 2, 2009 Report Share Posted March 2, 2009 just go as low as you can!Well said! Quote Link to comment Share on other sites More sharing options...
Little Green Giant Posted March 2, 2009 Report Share Posted March 2, 2009 i know! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.