Ellzbmx
-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Ellzbmx
-
I have the same issue, I was told it was something in the bottom end but that was 10k miles ago
-
2 1mm washers on the bottom two bolts inside your drum should do the trick Mine were £2 from wicks
-
How low can you go before chassis notching is necessary?
Ellzbmx replied to audiocandy's topic in Tuning
Yeah, it's not -
How low can you go before chassis notching is necessary?
Ellzbmx replied to audiocandy's topic in Tuning
http://instagr.am/p/WxFSuxEwfr/ That's mine with about 5 fingers of thread on the front Sometimes when I turn left sharp I hear the driveshaft hit -
Front speaker upgrade question
Ellzbmx replied to Ellzbmx's topic in Interior and In-Car Entertainment
I do have some 8mm mdf left are they only to space out the speakers? -
Hi I recently bought some new speakers to replace the stock ones in my doors They are jbl gto527 130mm two way After reading the how-to on here I think I know what to do but I don't have the tools to make an adaptor so they clear the windows when installed Would this be okay I'm not 100% and would like a second opinion before I waste £9 Look at this on eBay: Speaker Adaptor Kit for SEAT AROSA (1997-1999) http://bit.ly/ZSuhQ2 Also I will be running these off my pioneer headunit 4x50
-
Looks good with the 165 nankang, I got a 165/50 pottenza stretched onto my 8j wheel the other day and they wouldn't give my wheels back cause it was a little too much stretch
-
This is Rory my 1.0 mk1 arosa s This is when I got him 6 months ago Completely standard except for some smoked indicators Picked up some jom coilovers and bought a set of bbs reps off a friend After running those for a few months I fancied a change Tried on a couple of friends wheels 16" steels Compomotives 15" Then I found a set of rota zeros on here from vwcal so snapped them up as quick as I could They were 8j et0 on the back so I was quite worried how they'd sit on my standard arches Luckily a friend is handy with a copper hammer and flattened them for me but they still poked out a bit much for my liking so I added some camber Pretty stoked how it is now Plans are to get bigger spacers on the front and some new seats Thanks for looking
-
Cut the bumpstops down a bit it stops it being as bouncy
-
Looks sick man!
-
Looking awesome man
-
Bit late but I had the tappets replaced on my arosa 1.0 mpi Cost £200 all in
-
Looks boss on the banded steels man
-
Love 3l's this looks awsome
-
Looking good amber shame about the fire It's ellz Henderson btw
-
I have my sub wedged in the same way Love the car!
-
Can't really see that we'll quite subtle stretch
-
Lupo has gone, here's the new car :) Borbet content inside!
Ellzbmx replied to Brad1992's topic in Member's Cars
Looks sweet! -
Went to micheldever tires yesterday for 2 conti 145/65 and got em cheated on Really pleased how it looks had to raise the front slightly so it doesn't rub
-
Looks good man
-
Update on the wheels Managed to get the remaining fake bolts off the wheels Then started filling the fake holes Sanded down and gave a few coats of primer Going to pick a couple 145/65 tires tomorrow hopefully should have them on by the weekend
-
Oddshoes - big little car (MK1 Seat Arosa 1.0S)
Ellzbmx replied to oddshoes's topic in Member's Cars
Great to see another yellow arosa about, whack a set of Joms on and it'll be a treat to drive How are you getting on with the pedal box work? Mines in for repairs ATM, hydraulic lifters have seized -
Dropped the car off at Sjb autotech in basingstoke to get the hydraulic lifters replaced as I had a big tapping noise, also driveshaft is on the way out so need to source one of them before the weekend Joy
-
Hi my mk1 seat arosa started knocking quite bad on the drive side today I think the cv joint has gone I have wound my coilovers all the way up to lessen the pressure on the joint but am unsure how long it will last before I loose drivability Can anyone let me know how hard it is to replace and how much I'm looking at Google hasn't helped me All I know is the shafts 750mm with 22 teeth and a 94mm inner?
-
Joms aren't that bad, needed to cut bumpstops down sothey weren't bouncy all the time, bump strips took ages!
