Jump to content

Breaking Jazz Blue Sport


MdBrOoN
 Share

Recommended Posts

Breaking jazz blue lupo that had an AFH conversion, big end bearing went on cylinder four and con rod shot through the block, so most parts available from the car. Going to be weighed in soon so thought i'd see if anyone needs parts first.

Few interesting parts such as :

Raceland manifold which has had the egr valve bit blanked and is ready to fit straight onto a sport or gti. £130.

FK Stainless cat back with middle and rear silencer, center single exit, gives the car a nice note but isn't too loud. No idea what its worth, was on the car when i bought it so say £150 ono. i have cut the original downpipe with cat on it to fit straight onto the raceland manifold with the cat still attached. could do a deal for the complete system.

Cross drilled and grooved standard size front brake disks, cost £53 from ebay and done no more than 2000 miles, £25

40mm lowering springs, no idea what make, the plastic coating has started to peel a bit but nothing major, £30

I Have everything needed for an AFH engine conversion except the actual block, if anyones interested give me a shout.

Original engine was AFK, so i have a few things like inlet manifold and throttle body etc, give me a shout if you need anything

Apart from that i have most standard sport items so anything you may need just ask and i'll hopefully be able to sort you out. I'm back from uni this weekend so if anyone wants any pictures just ask.

My number is 07976450265

I'll be able to post most things for price of postage but obviously for larger items such as exhaust i'd rather have collected. Based in Perth, Scotland but stay in Glasgow during the week.

Think that's everything, Cheers!

Mark

Edited by MdBrOoN
Link to comment
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

@ luponortheast, the windows aren't pop outs, sorry.

@jamiea7x, I don't have the underpanel. I have the c pillar trims which are grey and in good nick and for the handles do you mean the whole door cards or just the door handles (when i stripped my car out i couldn't figure how to remove the handles from the cards) but i have them also, ill bring them to glasgow this weekend and you could have a look?

Cheers, Mark

Link to comment
Share on other sites

Hi, do you have the front passenger side wing, the trim that surrounds the grill and front indicators, the rear bumper and the front lower part of the bumper? If so, how much for the lot?

I have all these mate, the wing is in good condition, the front lower bumper is fine when you look at it on the car but when its off there is a crack on the bottom of it, the indicators and surround is ok but one of the indicators is cable tied on at the top as the mount broke,and the rear bumper is ok but the laquer has come of on the back left corner. ill get you some pics so you can see everything. are you based near perth at all? i'll work out a price. cheers,Mark

Link to comment
Share on other sites

@ luponortheast, the windows aren't pop outs, sorry.

@jamiea7x, I don't have the underpanel. I have the c pillar trims which are grey and in good nick and for the handles do you mean the whole door cards or just the door handles (when i stripped my car out i couldn't figure how to remove the handles from the cards) but i have them also, ill bring them to glasgow this weekend and you could have a look?

Cheers, Mark

Infact never mind mate I noticed u said it's the light grey interior u have so the handles are no use I'll still have the c pillar trims tho bud but I can't make it this weekend it'll have to be next week tho if that's possible buddy..

Link to comment
Share on other sites

Infact never mind mate I noticed u said it's the light grey interior u have so the handles are no use I'll still have the c pillar trims tho bud but I can't make it this weekend it'll have to be next week tho if that's possible buddy..

Yeah that's fine mate, the pillars are sitting in my room anyway so they won't be scrapped.

Is it just the fabric bits that go from basically the top of the rear seats to the roof lining or do you want the plastic bits that cover the seatbelts as well?

Cheers

Edited by MdBrOoN
Link to comment
Share on other sites

@83wedge - I'll check courier prices and get back to you and we can sort a price out

@Samatkinson - I have another guy interested who's waiting on pictures. The wing is in good condition, indicator surround is in ok condition and front bumper has a few scratches on it and the corners are bent in at the wheel arch. I'll get some pics up this weekend its hard to describe without them

What part of the front bumper are you after? looplooplupo was only after the lower black bit with foglight surround.

Cheers, Mark

Link to comment
Share on other sites

Im after a fuse box cover if possible! Cash waiting for some strange reason i never had one! =]

Do you mean the fuse box cover for the fuse box in the car or the one on the battery? i don't think i have one for the inside of the car but i'll double check.

Cheers,Mark

Link to comment
Share on other sites

@Samatkinson - I have another guy interested who's waiting on pictures. The wing is in good condition, indicator surround is in ok condition and front bumper has a few scratches on it and the corners are bent in at the wheel arch. I'll get some pics up this weekend its hard to describe without them

What part of the front bumper are you after? looplooplupo was only after the lower black bit with foglight surround.

Cheers, Mark

Kind of interested in the lot, depending on condition, was going to smooth and colour code a front end, hence needing the bits. But I 100% need indicator surround and the nsf wing as long as theyre decent

Thanks

Sam

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.