depthmvm Posted June 14, 2013 Report Share Posted June 14, 2013 (edited) Specs:Car: Seat ArosaEngine: 1LColour: Canica BlueMiles: 87,000 When purchasedMods Done:Under dash cup holdersDe-badgedLupo Rear LightsHead-unitBoot buildPressed Plates - back to stock (Police)Wheels - Classified InformationCoilovers - JOMDe-wiperRoof Rack Edited August 4, 2014 by depthmvm 2 Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 15, 2013 Author Report Share Posted June 15, 2013 Ok so day 2? or day 1, depends on how you look at it? Anyhow, got her home about 10 am this morining, gave her a wash a clean inside and out.That's where she will sit for about 2 months maybe sooner! as I have yet to pass my test, money is very sort at the moment as I just got this. Like I said I work seasonal work, witch finishes next week, then reopens again in 8 weeks.Thanks for reading Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 16, 2013 Author Report Share Posted June 16, 2013 So day 3! Got the carpet cleaner out and did the seats.It might not look like i did them but the colour and cr*p that came out of them was unreal.Got the hover out too Hehe you can see Paul the seal sticking his head out.Also got this little fella' with the carThanks for reading! Quote Link to comment Share on other sites More sharing options...
ma11b Posted June 16, 2013 Report Share Posted June 16, 2013 Lovely colour :-) Quote Link to comment Share on other sites More sharing options...
Lupo-Gaz Posted June 16, 2013 Report Share Posted June 16, 2013 Best colour for an Arosa! Looks clean too! Quote Link to comment Share on other sites More sharing options...
Lupo-Joe Posted June 16, 2013 Report Share Posted June 16, 2013 Cleaaan Quote Link to comment Share on other sites More sharing options...
Al3xTee Posted June 16, 2013 Report Share Posted June 16, 2013 Good base, clean Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 16, 2013 Author Report Share Posted June 16, 2013 Best colour for an Arosa! Looks clean too!Few body marks but what can you expect from a 10/11 year old car, can't complain! Also: UpdateBooked my Theory for 28th, give me some time to revise. Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 17, 2013 Author Report Share Posted June 17, 2013 (edited) So waiting to go work I decided to de-badge! Before:During:Seat done:Arosa S done:Final outcome: Thanks for reading! Edited June 17, 2013 by depthmvm Quote Link to comment Share on other sites More sharing options...
tomtomwilliams Posted June 17, 2013 Report Share Posted June 17, 2013 Looks good! Wish I'd thought of something like this for a first car! Quote Link to comment Share on other sites More sharing options...
beng120 Posted June 17, 2013 Report Share Posted June 17, 2013 Looks much better with the badges off, ive got exactly the same car only a year older, has the awful grey and black interior and the red rear lights though gonna take my badges off! Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 17, 2013 Author Report Share Posted June 17, 2013 Looks much better with the badges off, ive got exactly the same car only a year older, has the awful grey and black interior and the red rear lights though gonna take my badges off!No badges = Clean! I'm trying to find some Cambridge lights for mine, but moneys is short at the mo' Quote Link to comment Share on other sites More sharing options...
GTIChris Posted June 17, 2013 Report Share Posted June 17, 2013 Standard Lupo lights can be picked up cheap and will look better IMO until you can afford cambridges Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 17, 2013 Author Report Share Posted June 17, 2013 Standard Lupo lights can be picked up cheap and will look better IMO until you can afford cambridges There is some on Ebay for £20 at the mo'I know they have to be modded to fit but does it need soldering? or just swap the wries around?Thanks! Quote Link to comment Share on other sites More sharing options...
GTIChris Posted June 17, 2013 Report Share Posted June 17, 2013 These may help http://forums.clublupo.co.uk/index.php?/topic/95618-how-to-correctly-modify-terminal-blocks-for-rear-lightstereo-modifying-etc/http://forums.clublupo.co.uk/index.php?/topic/63340-how-to-fit-lupo-rear-lights-on-an-arosa-mk2/ Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 18, 2013 Author Report Share Posted June 18, 2013 (edited) So I am need of your knowledge!So I found some wheel I really like but they are 4x108 Is there a cheaper option than adapters? Edited June 18, 2013 by depthmvm Quote Link to comment Share on other sites More sharing options...
beng120 Posted June 18, 2013 Report Share Posted June 18, 2013 Put simply... nope Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 23, 2013 Author Report Share Posted June 23, 2013 So wheels put on hold for the moment Looking into do a clean boot build. Not having a sub just slide around in the back So does anyone have the correct sizes? Il do a quick mock up.... Quote Link to comment Share on other sites More sharing options...
Pete91 Posted June 23, 2013 Report Share Posted June 23, 2013 Use the boot carpet as a template and you'll get all the dimensions you need. Remember that the back of the seat comes out an angle so you'll need to take that into account when designing the build. Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 23, 2013 Author Report Share Posted June 23, 2013 Use the boot carpet as a template and you'll get all the dimensions you need. Remember that the back of the seat comes out an angle so you'll need to take that into account when designing the build.Ahah forgot about that Also what the best way to go about doing it?Key:Grey = SubBlack = Wood Quote Link to comment Share on other sites More sharing options...
Pete91 Posted June 23, 2013 Report Share Posted June 23, 2013 Use the top one cos it'll make it sturdier when in place. Just make sure the internal volume matches the spec of the sub 1 Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 26, 2013 Author Report Share Posted June 26, 2013 So a package showed up at my house. FittedAlso I think I did something wrong Reverse Light only works on LHS?Fog Light only works on RHS? Quote Link to comment Share on other sites More sharing options...
James827 Posted June 26, 2013 Report Share Posted June 26, 2013 only on side is for fog-lights, and not sure on reverse lights, most cars only have one Quote Link to comment Share on other sites More sharing options...
Adam R4 Posted June 26, 2013 Report Share Posted June 26, 2013 You need to run a fog wire to your n/s and a reverse wire to your o/s making 2 fogs and 2 reversing lights! Easy peasy Quote Link to comment Share on other sites More sharing options...
depthmvm Posted June 26, 2013 Author Report Share Posted June 26, 2013 You need to run a fog wire to your n/s and a reverse wire to your o/s making 2 fogs and 2 reversing lights! Easy peasy Ah but I have no Idea what I'm doing, It took me like 20 minutes each side to do. Then I hit that problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.