LiamD Posted July 15, 2010 Report Share Posted July 15, 2010 Of course it could fit, with serious modification.Not a particularly good engine though. Heavy (for what they are) and expensive to maintain and tune.There is a reason why more and more RX7's have LSX based engines in them. Even more impressive, the LSX engines are just as light as a rotary! Quote Link to comment Share on other sites More sharing options...
marcusgrant Posted July 15, 2010 Report Share Posted July 15, 2010 anything can be made to fit if you really want it to Quote Link to comment Share on other sites More sharing options...
IDGM Posted July 15, 2010 Report Share Posted July 15, 2010 And YOU know that none of those who replied knows if it can be made to fit?Yes. Because nobody on here has an RX7 powered Lupo or Arosa, therefore nobody has experience of the work required to make it fit.Q.E.D.But that doesn't mean it can't be done. Quote Link to comment Share on other sites More sharing options...
ash24 Posted July 15, 2010 Report Share Posted July 15, 2010 good point i could just use the original mounts thenwhere's that bloody like button gone?! Quote Link to comment Share on other sites More sharing options...
AlexTRea Posted July 15, 2010 Report Share Posted July 15, 2010 no. done. Quote Link to comment Share on other sites More sharing options...
jonnykell1980 Posted July 16, 2010 Report Share Posted July 16, 2010 where's that bloody like button gone?!soz mate dont understand. Quote Link to comment Share on other sites More sharing options...
MdBrOoN Posted July 21, 2010 Report Share Posted July 21, 2010 You could probably fit it in a lupo if you folded the back seats down. might want to put a sheet down incase its oily though Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted July 21, 2010 Report Share Posted July 21, 2010 what a tool you are!Id be proud of that , only 18 posts ever made and he took time out of his day to make it public his views of you. Quote Link to comment Share on other sites More sharing options...
nfbr Posted July 21, 2010 Report Share Posted July 21, 2010 Id be proud of that , only 18 posts ever made and he took time out of his day to make it public his views of you.LOL!Talk about judging a book by it's cover! At least I read the first few pages before making my judgement Making me less of a Tool than him! Logic - It gives an answer for everything! Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted July 21, 2010 Report Share Posted July 21, 2010 Makes a mockery of your 2009 member of the year status ha ha Quote Link to comment Share on other sites More sharing options...
nfbr Posted July 21, 2010 Report Share Posted July 21, 2010 um, I don't get it? Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted July 21, 2010 Report Share Posted July 21, 2010 Under your avi picture Quote Link to comment Share on other sites More sharing options...
nfbr Posted July 21, 2010 Report Share Posted July 21, 2010 Well yeah, that's been there for near on 8 months... But why does it make a mockery?I'm not member of the year 2009 because 'new people' like me...I'm member of the year because I consistently hand out an evenly distributed amount of knowledgeable advice, sarcastic abuse and a boat load of honesty! Quote Link to comment Share on other sites More sharing options...
Haakon Posted July 21, 2010 Report Share Posted July 21, 2010 My two cars:Same engine in the cosmo as a rx-7, only 4 inches longer, but same width and height. Both my EYES and my tape measure says that a 13b-rew engine from a fd rx-7 don't fit in the Lupo, but hey what do I know? I haven't actually TRIED to fit it in... Right? Quote Link to comment Share on other sites More sharing options...
karting Posted July 25, 2010 Report Share Posted July 25, 2010 love the old cosmo's engines. MY current toy car is a RX7 FD3S would love a 20b engine to go in it, espch as i did the eccentric shaft last weekend, on the 13b engine. Quote Link to comment Share on other sites More sharing options...
Haakon Posted July 25, 2010 Report Share Posted July 25, 2010 Then you can have some more pics The lower red line marks the space needed for the pulleys, and as you would have to mount it transversely in a fwd Lupo, even this space in longer than the length of the engine bay, never mind the space needed marked by the upper red line, which is the space needed for the turbos on one side, and the spark plugs on the other side. The oil filter sits even longer out than the end of the red line, forgot to take that into account. So please anyone who wants to do this conversion, please film it and upload on youtube, I bet we all will learn a lot new swearwords we didn't even know about Quote Link to comment Share on other sites More sharing options...
karting Posted July 25, 2010 Report Share Posted July 25, 2010 Haakan the 20b's are lovley engines, and with perphial porting sound the absoulte ****.Somehow i think he would struggle to fit my engine in a lupo, in fact i dont even think my v-mount would fit in there! Quote Link to comment Share on other sites More sharing options...
marcusgrant Posted July 25, 2010 Report Share Posted July 25, 2010 LOL at the 3l engine!!!! looks like a vacuum cleaner!!!!!! Quote Link to comment Share on other sites More sharing options...
Haakon Posted July 26, 2010 Report Share Posted July 26, 2010 It also goes like a vacuum cleaner! But it sounds like a tractor! Quote Link to comment Share on other sites More sharing options...
IDGM Posted July 27, 2010 Report Share Posted July 27, 2010 Who said anything about a transverse front fit?Anyway, I don't care. Quote Link to comment Share on other sites More sharing options...
nfbr Posted July 27, 2010 Report Share Posted July 27, 2010 boob Quote Link to comment Share on other sites More sharing options...
Haakon Posted July 27, 2010 Report Share Posted July 27, 2010 Yeah, cause if fits sooo good longitudaly in a engine bay half the length. Might as well fit a 7 liter Chevrolet LS7 V8 then, cause that fits in a RX7 fd3s engine bay. And its a breeze making a Lupo RWD, with the engine halfway under the dash, and gearbox behind it. Wouldn't need a driveshaft though, the rear diff would fit right on the end of the gearbox Happy building! Quote Link to comment Share on other sites More sharing options...
Tigzâ„¢ Posted July 27, 2010 Report Share Posted July 27, 2010 Then you can have some more pics Mate, this thread was the most boring un-useful thread I have ever come across and almost deleted till I saw your post.Best post of 2010 for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.