johnyoung

i was stumped by this too, i just gave up, would be good to get it off tho.

bearing, itl be a front.

search for a member called lupoboz on here, pm him what you need and your reg number.

bonrath are cheaper, iv only fitted the front wishbones so far but seem fine. got them from ebay, around £50 for front wishbones and rear axel.

Bump still after a set

bump, anyone else?

is it a sport?

yeh does your interior light come on when you open the door? mine does that because both door switches are broken. If i unlock the car then open the boot, it doesnt lock after 30 seconds, because the boot swith is working.

after a set of roof bars, let me know. Thanks oh for a lupo/arosa

and youl need to use some long nose pliars with some tape on so they dont damage the bulb, and it just pulls out.

just turn the knob to "1" and pull

is it 3l of oil needed?

these arrived today will hopefully get these fitted over the next couple of day, will get photos when there on.

im not sure on the amount of oil, but instead of a big hex key, you can use a bolt head or somthing similar. hope this helps.

ebay

do either have electric mirrors?

either way confort will decrease, especially if going for cheap springs or coilovers. go for springs if you dont want height adjustment and coilovers if you do. if you want a good ride and a drop buy more up market coilovers. kws are good, nice ride. hope this helps. and you should really use the search or google, this question is asked all the time.

no thats no in the way when the cupholder is slid in like in the photo i posted it hits the bottom of the cd played.

what do you mean the undertray? as in the panel bolted to the underside of the centre console that the cup and coin holders slide into?

ah i get you on the underside of the exsisting dash/centre console. il have a check, mine was cut out and i thought it was hitting the underside of the cd player, but will check again, might have been mistaken. thanks

any updates on this?

not really sure what i want to do yet, just sorting little nigly bits that are annoying me just now and keeping an eye out for wheels.

coilover will probably happen at some point, but content with the way it sits and handles just now on the konis.

yeh i dont understand why the holders dont fit, is this normal? yeh there gti fronts onto arosa clocks, the gti clocks didnt work when plugged it, although i have heard that they may work on some non gti cars.

just ordered led number plate bulbs and interior bulb. also oil service stuff for gearbox and engine, and polybushes for front wishbones and rear axel, and stuff for finishing my exhaust. will update with pictures as and when.