max West-York

cheers guys and I'm local yeah mate, I went to holmfirth last week which is probably when you saw me

couple of rear shots I like

10?! I struggle to drop below 15mpg in the VR, probably because its too low to drive spiritedly enough to drop my mpg usually sits around 24-26mpg daily use and as high as 32.5 and thats out of a 2.9L running roughly 200bhp

more random ones from instagram #maxrado if you wanna follow me

THEEZ R GUD IN REEL LYF nah but seriously get the other rear springs in assap

not at the front no nothing at all backs are a lot more work that the front because of the awkward shape of the shell as you have to roll right up into the bumper mounts which can cause problems, and the fronts can be flared more during rolling that the rears, this is even with camber shims too

yeh no problems at all

I got 15x8 et25 up front with no problems at all, 195/45s on too, I wouldnt write it off just yet, find out the offset, if its +25 or more youll be okay EDIT: I had rolled arches, thats all the archwork youd need 8.25 on the rear could be a problem as mine were quite tight

natural camber from lower ride height, nothing to worry about.

if youve dewipered it it could be leaking through, my boot stopped working on central locking cos the wiring had got damp, sealed the leak and let it dry out then it was fine again

cheers, yeah insurance isnt great.. No where I ever need to go has speedbumps on the way, and if I ever got to one I think Id have to just turn around, but if it was very important I have some blocks of wood in the boot for when I get stuck Thanks man cheers, I've wanted one ever since I got the loop

As some of you know the loop sold back in october, the same week I picked up my 1994 corrado VR6 had a lot of work done through winter including new steering rack, tie rods, new mk5 golf ally sump, few sensors, sparks and HTs, a couple of coolant tubes, replaced ALL fluids cleaned out the rad and converted from G11 to G12 with a new expansion tank, had the chassis notched got hold of some wheels (purely for the stance I'm still not in love with them but they were cheap and money is tight atm!) and then stuck it on its arse - oh and a skid plate too since I've already been through 1 sump... also had front bumper respray and a bit of rust sorted underneath the spoiler bonnet washed smoothed and relocated in scuttle and side repeaters smoothed also anyway heres some pics for those interested! I should be at UD next weekend for those going!

they're not splits.

heatgun/hair dryer and dental floss did mine and a mates with same technique and no paint damage (mine was silver his is black)

fogs is easiest option, just get a lower grille with fog cut outs and retrofit indicators there