3lward Posted February 29, 2012 Report Share Posted February 29, 2012 ive read through the wiring guides etc. Took my arosa lights out today took the bulb holders out and they dont fit in the lupo lights at all there just out. Contacted lupoboz about lupo bulb holders to which he said there both the same, Confuseeeed! Quote Link to comment Share on other sites More sharing options...
Adam R4 Posted February 29, 2012 Report Share Posted February 29, 2012 Its not the bulb holders you change....You re-wire your existing plug to match lupo pin outs. Quote Link to comment Share on other sites More sharing options...
3lward Posted March 1, 2012 Author Report Share Posted March 1, 2012 But my arosa bulb holder doesnt fit into the lupo lights? Quote Link to comment Share on other sites More sharing options...
Koop Posted March 1, 2012 Report Share Posted March 1, 2012 Erm, see above? You're swapping the entire unit, you just change the wires round in the connector plugs. Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted March 1, 2012 Report Share Posted March 1, 2012 As above, swaping the lights over has nothing to do with the bulb holders.Just need to re-wire the block on the car and plug the new lights in. Quote Link to comment Share on other sites More sharing options...
3lward Posted March 1, 2012 Author Report Share Posted March 1, 2012 But the lupo lights i have dont have the bulb holder with them. Quote Link to comment Share on other sites More sharing options...
Koop Posted March 1, 2012 Report Share Posted March 1, 2012 Gutted, best get onto Lupoboz for the bits then Quote Link to comment Share on other sites More sharing options...
3lward Posted March 1, 2012 Author Report Share Posted March 1, 2012 i have but he has said there the same part number as the lupo Quote Link to comment Share on other sites More sharing options...
Koop Posted March 1, 2012 Report Share Posted March 1, 2012 Ahhhh yeah I see where your coming from now sorry, maybe try him again I take it yours is a Mk2? The light units are very different so I wouldn't expect the internals to be same, maybe he thought you had a Mk1 which have very similar units? Quote Link to comment Share on other sites More sharing options...
vince172 Posted March 1, 2012 Report Share Posted March 1, 2012 Try getting on vagcat.com for part numbers Quote Link to comment Share on other sites More sharing options...
Cannonball Posted March 1, 2012 Report Share Posted March 1, 2012 To stop people guessing which arosa have you got and which lights are you trying to fit into it.A picture saves a thousand words Quote Link to comment Share on other sites More sharing options...
3lward Posted March 1, 2012 Author Report Share Posted March 1, 2012 As it says on my avatar. Seat Arosa Sport, they didnt make a mk1 sport Quote Link to comment Share on other sites More sharing options...
MiiTCH-TDi Posted March 2, 2012 Report Share Posted March 2, 2012 They did do a mk1 sport 100bhp? Quote Link to comment Share on other sites More sharing options...
Adam R4 Posted March 2, 2012 Report Share Posted March 2, 2012 They did do a mk1 sport 100bhp?Im sure they did...or was it 1.4 75bhp?... Quote Link to comment Share on other sites More sharing options...
jabbles21 Posted March 2, 2012 Report Share Posted March 2, 2012 As it says on my avatar. Seat Arosa Sport, they didnt make a mk1 sport Ouch. Quote Link to comment Share on other sites More sharing options...
Adam R4 Posted March 2, 2012 Report Share Posted March 2, 2012 Quote Link to comment Share on other sites More sharing options...
3lward Posted March 2, 2012 Author Report Share Posted March 2, 2012 Oh well, stand corrected. Quote Link to comment Share on other sites More sharing options...
Lupoboz Posted March 5, 2012 Report Share Posted March 5, 2012 Hi 3lward, If you were to PM me with the chassis and registration number of your Arosa, l'll double check the bulb holders this end, as l was only looking at an early listing of the bulb holders, whilst looking at you enquiry.Let me know at some point and l'll have another look for you. What sort of Lupo lights are you aiming to install? As that will also help me to asist you.Regards, Dale. Quote Link to comment Share on other sites More sharing options...
3lward Posted March 6, 2012 Author Report Share Posted March 6, 2012 All sorted now, found a mk1 arosa in the scrayard and nabbed the bulb holders off that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.