-
Posts
2,219 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Calendar
Everything posted by James827
-
Constant noisy tappets - need to replace?
James827 replied to JampotJamie's topic in Car Care, Maintenance and Mechanical
its worth taking the rocker cover off and checking your lifters and cam aren't screwed too. if they are rooned just get a cam of a low mileage Polo at there stomping ground (the scrap yard) and a new set of lifters, which just slot in an out and it should be much quieter. -
assuming he brimmed it with 40L of diesel then 51mpg. not bad, a much more sensible MPG figure compared to people claiming 100mpg in a 1.4tdi lupo after a remap ....
-
cheaper than the lupo? mine was £200 cheaper
-
keep the fire extinguisher for the golf. serious.
-
all you need now is some new bumpstops! i do like this, it may be standard etc, but the way its all been given some proper TLC makes me feel warm inside.
-
the one with extra cylinders? i have no problem with this.
-
Club Lupo, MK2 society!
-
wheels vibrating as we accelerate and wobble at 60mph
James827 replied to loopykko's topic in Volkswagen Lupo
track rod ends and steering rack good? -
it looks pretty clean tbf, replace the aftermarket with OE and your onto a winner!
-
goody. checked for rust? reach up into where the bonnet hinges are and check its all good. check where the seat runners are and just behind them in the passenger section is not crispy. pull back the rear turret carpet etc check for nastiness there. and underneath there should be lines of bungs on the inner sill, make sure those bung holes are SOLID. also if there's like mushroom/doughnut things at the front put your fingers in there and check they are not rusty. sounds thorough but that's not far of the mileage of mine so could hide some naughty. i just had a walk around mine on the ramps, no touchy, as it all looked good.. slathered with underseal.. not bad though, looks tidy
-
Humming Noise between 50mph and 65mph
James827 replied to muzza1986's topic in Car Care, Maintenance and Mechanical
Either tyre noise or wheel bearing most prob -
i might go for a day, not sure yet though
-
Hydraulic clutch conversion ?
James827 replied to retrodrifter's topic in Car Care, Maintenance and Mechanical
we had an Audi A2 engine rig in college, same as polo, lupo 1.4 engine, and it had a hydro clutch http://www.ebay.co.uk/itm/AUDI-A2-1-4L-16V-PETROL-5-SPEED-MANUAL-GEARBOX-CODE-GD-TL-023-52300MILEAGE-/330970681980?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AAudi%7CModel%3AA2%7CCars+Type%3A1.4&hash=item4d0f63d27c im guessing it wont fit as you said nothing will .. i dont know? -
Hydraulic clutch conversion ?
James827 replied to retrodrifter's topic in Car Care, Maintenance and Mechanical
im pretty sure you will need to sort out engine mount, its not a straight fit but is possible. -
check your petrol flap
-
guy not interested in a swap koop?
-
steel rule and a Stanley knife would work but would take time!
-
interesting. indeed
-
specs on the MK2?
-
sorry dude, that's not GTI interior, just dark grey regular ones..
-
cat on manifold glowing red
James827 replied to sheepslupo's topic in Car Care, Maintenance and Mechanical
any Warning lights? -
I just hacked away at my power flow system, but that's just me, and im sure it wasn't worth much
-
if you want more clearance on the subs, the seats on the rear have two back rest positions, the clips by the seat belts have two notches on them (the ones you pull back to release the seat) dont mean to tell grandma how to suck eggs, just incase you dident know
-
maybe you should contact them like the OP, im sure they are not produced in the first place due to lack of interest, but if you get some buyers on here i don't see why they wont make them.