Epick Posted April 29, 2013 Report Share Posted April 29, 2013 Hey Everyone,My Girlfriend has a Bright yellow lupo! It has it's MoT coming up very soon and the rear window wiper jet won't spray the wiper fluid, I'll be having a look this evening. I've heard this is a common problem is there anything I should be looking for?Cheers! Quote Link to comment Share on other sites More sharing options...
Epick Posted April 29, 2013 Author Report Share Posted April 29, 2013 Hey Everyone,My Girlfriend has a Bright yellow lupo! It has it's MoT coming up very soon and the rear window wiper jet won't spray the wiper fluid, I'll be having a look this evening. I've heard this is a common problem is there anything I should be looking for?Cheers! Quote Link to comment Share on other sites More sharing options...
mattarosa Posted April 29, 2013 Report Share Posted April 29, 2013 erm a pond in the boot lid, the hose may have popped off inside, if so just push it back on and cable tie it on, im assuming it has washer fluid in? Quote Link to comment Share on other sites More sharing options...
Al3xTee Posted April 29, 2013 Report Share Posted April 29, 2013 Passenger side, door card off, plastic trim off, reveal washer pipe disconnected, reconnect, plastic trim back on, door card back on, right stalk push forward, watch water squirt out. Stand back and admire your work. Quote Link to comment Share on other sites More sharing options...
electricracer Posted April 29, 2013 Report Share Posted April 29, 2013 rear washer isnt part of the mothowever as said before its more than likely a pipe poped off, also check the nozzle not blocked, just pull the plastic bit out the middle of the wiper and try Quote Link to comment Share on other sites More sharing options...
motty Posted April 29, 2013 Report Share Posted April 29, 2013 hi, it may be that the plastic pipe inside the wiper motor has broken, the water then leaks from the motor casing, this happened to mine. Quote Link to comment Share on other sites More sharing options...
Epick Posted April 30, 2013 Author Report Share Posted April 30, 2013 Thanks for all the replies! I took the boot plastic card off and anyway it's the actual jet isn't facing up so it squirts inside the boot. Can the black plastic cap on top of the jet be pulled off? I imagine I need to loosen the bolt then twist the jet up and retighten Quote Link to comment Share on other sites More sharing options...
GeoffD Posted April 30, 2013 Report Share Posted April 30, 2013 just twist the black jet carefully with a pair of pliers until it sprays where you want it to, simples. be careful though, geoff Quote Link to comment Share on other sites More sharing options...
SlammedTurtleJC Posted January 23, 2014 Report Share Posted January 23, 2014 How do you pull off the plastic trim in the bootlid? I've got as far as taking the torx screws out of the boot lid trim handles, popped out the white clips. I can flex the trim down far enough to see the hose has popped off, but I can't pull the trim off anymore. It looks like there's bigger clips inside that are part of the trim, but I can't relieve them from the slots there in. Any ideas? Quote Link to comment Share on other sites More sharing options...
matt123roll Posted January 23, 2014 Report Share Posted January 23, 2014 How do you pull off the plastic trim in the bootlid? I've got as far as taking the torx screws out of the boot lid trim handles, popped out the white clips. I can flex the trim down far enough to see the hose has popped off, but I can't pull the trim off anymore. It looks like there's bigger clips inside that are part of the trim, but I can't relieve them from the slots there in. Any ideas?Pull. Hard haha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.