pieface Posted February 2, 2012 Report Share Posted February 2, 2012 Looking at buying a set of AEZ Paron's in 15x7.They are wrapped in 165/50R15 nangkang ns2 rubber.I'm unsure on the et, but what is the limit before arch work? Will I need to pull/roll the arches for these to fit?I will get the et later today, but urgently need an answer.Cheers, pie Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted February 2, 2012 Report Share Posted February 2, 2012 Going off what I can find on the net they're gonna be et38 whic'll be fine with 165s.Anything lower than et30 and I'd be looking at rolling the arches anyway, just to be safe. Quote Link to comment Share on other sites More sharing options...
pieface Posted February 2, 2012 Author Report Share Posted February 2, 2012 Brilliant. Cheers mate. Quote Link to comment Share on other sites More sharing options...
pieface Posted February 2, 2012 Author Report Share Posted February 2, 2012 ET is 34 apparently, so should be ok.Cheers again Quote Link to comment Share on other sites More sharing options...
jakefresh Posted February 3, 2012 Report Share Posted February 3, 2012 i have a new set of wheels, ET37 with 195.50.15 still be ok? Quote Link to comment Share on other sites More sharing options...
jabbles21 Posted February 3, 2012 Report Share Posted February 3, 2012 depends how low you are.. 195 will be too wide if youre significantly low. better off with 165/50 or /45 if you're going really low Quote Link to comment Share on other sites More sharing options...
Koop Posted February 3, 2012 Report Share Posted February 3, 2012 Will rub a bit on 50 profile, especially if you're lowered. I'm gonna be running 195/50/15s on mine though, if the tyres are on em already you should be able to live with it & just get 195/45/15s when they need replacing - or 165/50/15s for a bit of stretch if you're particularly low as jabbles says Quote Link to comment Share on other sites More sharing options...
jakefresh Posted February 3, 2012 Report Share Posted February 3, 2012 nice, im at 40mm atm, when will they start to rub? Quote Link to comment Share on other sites More sharing options...
d@vid Posted February 7, 2012 Report Share Posted February 7, 2012 just thought i'd add that my bbs are 7j et38 and the inner lip sits incredibly close to the coilover adjuster ring, i'd suggest getting the smaller 165, not only will it look better it'll leave you more scope to go lower without issues Quote Link to comment Share on other sites More sharing options...
pieface Posted April 4, 2012 Author Report Share Posted April 4, 2012 Just to bump this topic. Did anyone manage to find the centrebore of these wheels? Looking at part/x-ing my car but keeping wheels. Quote Link to comment Share on other sites More sharing options...
Koop Posted April 4, 2012 Report Share Posted April 4, 2012 did you fit them? Quote Link to comment Share on other sites More sharing options...
pieface Posted April 4, 2012 Author Report Share Posted April 4, 2012 Yes but car is currently away and I'm trying to find out the centre bore. I can't find anything on the net Quote Link to comment Share on other sites More sharing options...
Koop Posted April 4, 2012 Report Share Posted April 4, 2012 If they went on a lupo it's 57.1 mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.