jakefresh

U came through the bus station last night. Sounded sweet!!!

Haha Pete! That shaft is in constant use and is still mint! But seriously. I think I'm gonna check all the strut nuts. Can anyone confirm if there is a nut between the top spring mount and the strut bush?

14" top line reps. Et38 6j with 165/60/14 tyres

Yh I've checked the wheel nuts and balance and there fine. No rub marks on the shaft or coilie and there's no obvious play in the joint or bearing???

Annoying! I've just replaced my stock suspension with my jom coilies. And whenever I turn right over about 20 there's a rotating dum...dum...dum... Sound that get faster if I'm going faster. I know it probably suspension related but I have no idea what in made sure everything is as tight as possible. Help!!

is this correct?

check this thread for full info: http://forums.clublupo.co.uk/index.php?/topic/95778-blowing-exhaust-give-this-much-loss-of-power/ further to this iv just scanned using my vagcom. and it returned this code where is this sensor, pics would be great! --------------------------------------------------------------------------- Monday, 01 July 2013, 19:19:43. VCDS-Lite Version: Release 1.2 Control Module Part Number: 036 906 014 AMu Component and/or Version: MARELLI 4CV 2801 Software Coding: 00001 Work Shop Code: WSC 01236 VCID: D0D3734303FB 1 Fault Found: 00513 - Engine Speed Sensor (G28) 27-00 - Implausible Signal -------------------------------------------------------------------------

ok got the vagcom to work! i ran 3 tests after clearing the first lot of codes (after iv had the engine in bits for months) heres what came back. has someone removed the EPC light? Monday, 01 July 2013, 19:13:32. VCDS-Lite Version: Release 1.2 Control Module Part Number: 036 906 014 AMu Component and/or Version: MARELLI 4CV 2801 Software Coding: 00001 Work Shop Code: WSC 01236 VCID: D0D3734303FB 8 Faults Found: 00519 - Intake Manifold Pressure Sensor (G71) 28-10 - Short to Plus - Intermittent 00518 - Shareware Version. To Decode all DTCs 30-10 - Please Register/Activate - Intermittent 00530 - Shareware Version. To Decode all DTCs 30-10 - Please Register/Activate - Intermittent 00525 - Oxygen (Lambda) Sensor (G39) 07-10 - Signal too Low - Intermittent 00513 - Shareware Version. To Decode all DTCs 27-10 - Please Register/Activate - Intermittent 00609 - Shareware Version. To Decode all DTCs 29-10 - Please Register/Activate - Intermittent 00610 - Ignition Output 2 29-10 - Short to Ground - Intermittent 00282 - Shareware Version. To Decode all DTCs 26-10 - Please Register/Activate - Intermittent --------------------------------------------------------------------------- Monday, 01 July 2013, 19:15:20. VCDS-Lite Version: Release 1.2 Control Module Part Number: 036 906 014 AMu Component and/or Version: MARELLI 4CV 2801 Software Coding: 00001 Work Shop Code: WSC 01236 VCID: D0D3734303FB 1 Fault Found: 00513 - Engine Speed Sensor (G28) 27-00 - Implausible Signal --------------------------------------------------------------------------- Monday, 01 July 2013, 19:19:43. VCDS-Lite Version: Release 1.2 Control Module Part Number: 036 906 014 AMu Component and/or Version: MARELLI 4CV 2801 Software Coding: 00001 Work Shop Code: WSC 01236 VCID: D0D3734303FB 1 Fault Found: 00513 - Engine Speed Sensor (G28) 27-00 - Implausible Signal -------------------------------------------------------------------------

ashh : i have changed the temp sensor to no avail!, i was going to get a 2nd hand coilpack from a friends loop hes braking, lupoluke : changed the cat because it failed emissions. iv got a vag com but cant get it to work, ill have another look at it

no its still pretty bad! its developed a fault where it dosnt start now, it turns and turns but just dosnt fire,my next jobs are plugs, HT, coilpack and fuel filter

Awesome! Thanks man!

Hey deadmetal! Where did you get your springs done? And how much?

right! cleaned the throttle body and checked for air leaks in the process! success! it was sorted. now its idleing very rough, and sometimes just splutters randomly, after a read im thinking its the temp sensor? would you agree?

awesome! ill give that a go!

When you say clean do you mean take it off Or leave attached? Using carb cleaner?