Jump to content

Mitchell

Premium Member
  • Posts

    8,968
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Mitchell

  1. lol think i'll show this thread to some one, cough
  2. i see just under an indicated 140 in 4th using a 1.4s box on my arc/afh
  3. are the rear seats in the lay down race position?
  4. buy some spray brake cleaner place rag over a screwdriver spray inside the plug shaft " with plug in to stop stuff getting in the bore " clean out the hole with rag on screwdriver once all oil is out remove the plug,and replace it. there will be a small lip where the cam carrier meet's the head this is where the oil is seeping through, make sure this is cleaned and smear a light coating of tiger seal/ sikaflex around the join allow this to go off before replacing the plug. job done 20 quid top
  5. blue 6 speed 3L sport , factory clean i hear.
  6. north of the angel is a northener,
  7. your mounts would fit straight onto the block/box allthough you would need to change to cable clutch and cable throttle pedal.
  8. it pains me to do ,i love the car but you gotta move on at some point i've owned it 6 years and would love to see someone get the grin i do when you open it up, who know's as i said if the main bit's do not go then i'll keep on enjoying it until it go's as a whole.
  9. lol forgot about that, no . may keep it as a hall mirror
  10. gti clocks £40 gti binnacle £20 shell with fully smoothed bay and id,jfh 6v plate £800??
  11. engine 174bhp 1600/1400, jenvey tb's, schrick cam's, sorg inlet, omex 600 ecu plus harness two wires to connect and away you go, £3000 AAS bespoke stainless exhaust system with s/s 4 branch £600 full fuschia leather interior, headlining,visors,all 4 cards,rear seats,recaro classic front's parcel shelf and rear tailgate panel, with smoothed and painted dash all plastic's and carpet £2000 full 3L conversion not just a front bumper and chopped wing's, fully smoothed front bumper with choice of fog light or blank inserts, two alloy 3L wing's, alloy door's,and full lupo 3L rear bumper again detextured with all fitting guides etc £1000 custom h&r coilover set up and bespoke rear setup can achieve mega lows's without air and is still cumfortable £500 with modified rear axle to suit. polished exhaust tunnel heat shields £50 gearbox £350 top fill rad£40 new non power assisted steering rack £80 wishbones with powerflex bushing£50 pop out window kit complete £80 . will only consider breaking if the main parts go 1st.
  12. still here, thinking about breaking this up as i'd get more probably
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.