loepan Posted January 8, 2013 Report Share Posted January 8, 2013 (edited) Anybody ran either type b/a azevs?Might be able to source a pair of 16' ones at 4x100 but seller has no ideas of et on them!Tried searching web can see type a's will be o.k but can't find much info on b's Edited January 16, 2013 by loepan Quote Link to comment Share on other sites More sharing options...
fattasss Posted January 8, 2013 Report Share Posted January 8, 2013 These are my Azev type A. Quote Link to comment Share on other sites More sharing options...
loepan Posted January 8, 2013 Author Report Share Posted January 8, 2013 Yeah I know what they look like, need et sizesIe will they fit thread in disguise Quote Link to comment Share on other sites More sharing options...
lupo1.0se Posted January 8, 2013 Report Share Posted January 8, 2013 Ayrton did for a wile can't remember his user name though. Quote Link to comment Share on other sites More sharing options...
ministig Posted January 9, 2013 Report Share Posted January 9, 2013 (edited) Azevs are normally similar offset to borbet A'sSo 16x7.5 et20 or 35 iircAnd 16x9 et15The 7.5's are flat face like the front wheels in the pic above, the 9's are the rears. Edited January 9, 2013 by ministig Quote Link to comment Share on other sites More sharing options...
loepan Posted January 9, 2013 Author Report Share Posted January 9, 2013 (edited) Do type b's come staggered aswell?Been offered type b's might go for em, owner knows jack ****e about cars, picture doesn't look like they are staggered....might just bite the bullet, go for em and if they don't work out stick em on my golf Edited January 9, 2013 by loepan Quote Link to comment Share on other sites More sharing options...
James827 Posted January 9, 2013 Report Share Posted January 9, 2013 (edited) i just got set of 15" ones with et of 35 (oh and 7j) Edited January 9, 2013 by James827 Quote Link to comment Share on other sites More sharing options...
loepan Posted January 9, 2013 Author Report Share Posted January 9, 2013 (edited) You better not run em before me! :-) Edited January 14, 2013 by loepan Quote Link to comment Share on other sites More sharing options...
James827 Posted January 9, 2013 Report Share Posted January 9, 2013 they are A's and i need spigots aha there going on my MK2 nayway Quote Link to comment Share on other sites More sharing options...
loepan Posted January 13, 2013 Author Report Share Posted January 13, 2013 Ok so on arrival all didn't look to bad.Wheels completely covered in muck, Unfortunately it all didn't come out in the washFrom the measurements on the now clean type b's I can see l4 98Which I presume are 4x98, which then leads me to think they might be 58.1 centre bore and not 57.1....How much of a problem is this, I know I can run wobble bolts but can I get spigots? I don't have the tools to accurately measure them and haven't tried fitting them yet.To top it all off 1 of them has a knock on the inner side lip causing a flat spot, don't know how much it puts it out yet or how bad it isTry and get pics up soonYou Win some you get ripped on some Quote Link to comment Share on other sites More sharing options...
loepan Posted January 13, 2013 Author Report Share Posted January 13, 2013 (edited) A Edited January 13, 2013 by loepan Quote Link to comment Share on other sites More sharing options...
jamiea7x Posted January 13, 2013 Report Share Posted January 13, 2013 (edited) couple winds of alu tape on your hubs will see you up to 58.1, its only an extra 0.5mm of tape around the hub, Edited January 13, 2013 by jamiea7x Quote Link to comment Share on other sites More sharing options...
JoeA Posted January 13, 2013 Report Share Posted January 13, 2013 ^ Quote Link to comment Share on other sites More sharing options...
loepan Posted January 14, 2013 Author Report Share Posted January 14, 2013 Was thinking that, gotta see how bad this dent/flat is before I put the graft in Quote Link to comment Share on other sites More sharing options...
ministig Posted January 14, 2013 Report Share Posted January 14, 2013 (edited) couple winds of alu tape on your hubs will see you up to 58.1, its only an extra 0.5mm of tape around the hub, That's what I would do.If its only a small flat spot, and doesn't leak air I would leave it, as it will more than likely balance out.If it leaks air whack it with a hammer and piece of Wood and add some gentle heat - or pay the professionals! Edited January 14, 2013 by ministig Quote Link to comment Share on other sites More sharing options...
loepan Posted January 15, 2013 Author Report Share Posted January 15, 2013 Pics of bend ,will see what the garage says, practicing the refurb on this one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.