robgti Posted April 18, 2009 Report Share Posted April 18, 2009 lupo got a 138.5bhp but its missing at top end due the the 02sencers are ****ed!so ill get them replaced and i should see over 140bhp then VideoOh and yes my Bathursts are now green lol Quote Link to comment Share on other sites More sharing options...
Lee_ Posted April 18, 2009 Report Share Posted April 18, 2009 Nice, whats the engine spec then? Quote Link to comment Share on other sites More sharing options...
robgti Posted April 18, 2009 Author Report Share Posted April 18, 2009 S/S Exhaust system and scorpion BackboxRaceland S/S 4 Branch - Heat WrappedSports Cat - 200 CellBMC CDA Induction Kit Quote Link to comment Share on other sites More sharing options...
little rich Posted April 18, 2009 Report Share Posted April 18, 2009 not a bad result matey, like the colour choice on the Bathursts, would look the nuts with a green roof Quote Link to comment Share on other sites More sharing options...
Emz Posted April 18, 2009 Report Share Posted April 18, 2009 Good result Rob Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted April 18, 2009 Report Share Posted April 18, 2009 Max torque at 6950 RPM? Whats going on there then? Quote Link to comment Share on other sites More sharing options...
robgti Posted April 18, 2009 Author Report Share Posted April 18, 2009 dunno it seems to of lost torque Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted April 18, 2009 Report Share Posted April 18, 2009 As standard it has 112ft-lb @ 3000rpm I think. Maybe a lack of backpressure fromt he exhaust system? Quote Link to comment Share on other sites More sharing options...
pro3mark Posted April 18, 2009 Report Share Posted April 18, 2009 There probably would be much of a back pressure issue compared to the standard system reading those specs.I would love to see a result after an Awesome remap!Do it RobMark Quote Link to comment Share on other sites More sharing options...
99hjhm Posted April 20, 2009 Report Share Posted April 20, 2009 (edited) If max torque was there the engine wouldn't pull below 4500! If the BHP is calculated from the torque(which it is) I don't think this is the genuine result. Edited April 20, 2009 by 99hjhm Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted April 20, 2009 Report Share Posted April 20, 2009 Power=(TORQUExRPM)/5252 So that should give you 134.97bhp? Have you used these rollers before? Quote Link to comment Share on other sites More sharing options...
robgti Posted April 20, 2009 Author Report Share Posted April 20, 2009 (edited) yeh i have, ive got another RR print out showing 142 bhp from different rollerssorting the sensors and having it rolled again at the end of may!so ill see what it gets then Edited April 20, 2009 by robgti Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted April 20, 2009 Report Share Posted April 20, 2009 When you last ran did it give such strange results?Compare your torque curve to this http://www.awesome-gti.co.uk/rollingroad/g...02.08/apayn.jpg Quote Link to comment Share on other sites More sharing options...
robgti Posted April 20, 2009 Author Report Share Posted April 20, 2009 im gonna sort the car and get it done again as im confused lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.