Jump to content

RichardS

Members
  • Posts

    205
  • Joined

  • Last visited

Everything posted by RichardS

  1. Not sure if they will suit it though
  2. Sounds like a window regulator problem, The window is driven from steel cables via the motor, these rust and fray and then get caught up in the mechanism, This then stops the window going up and the anti jam tells the window to go back down. If it is this the only way is a new regulator for a successful repair. It may be something else but from what you say this would be my first thought. HTH Richard
  3. I was hoping you were going to say that and not 12mm. To get a box size accurately you really need to know Thiele and Small Parameters of the sub you intend to use.
  4. RichardS

    arosa 1.4 tdi

    Good luck, Hope you get it sorted.
  5. What did you use ?, Looks like MDF but how thick ?.
  6. RichardS

    arosa 1.4 tdi

    Don't know much about diesels sorry but could it be fuel starvation, Have you ever changed the fuel filter ???. Coil pack on a diesel
  7. Don't forget you'll have to pay to have them fitted and balanced etc, Check with a few local tyre dealers first on what they charge and also ask how much they can do them for, You might get a saving.
  8. Pre-paint wipe will remove all the dust and any grease or oils that you can't see until the paint goes on, Also remember that preparation is most important, Cut corners here and the finished result won't be perfect.
  9. Wish I had seen this before now, Just spent all morning working it out and swapping the wires about All done now though
  10. RichardS

    spacersssss

    Just found some cheaper ones, 320275069264
  11. RichardS

    spacersssss

    Ebay, Item number is 250271365840, There are quite a few others too.
  12. RichardS

    Colour coding

    For you or the Loop
  13. RichardS

    Colour coding

    emilee, Did you get my PM , Bought myself a spoiler off ebay, There are still 5 available, Here is the item number, 140248968457 They are Morette.
  14. RichardS

    Pressed plates

    http://www.dubmeister.co.uk/ now do fully UK legal ones
  15. Very nice, Where did you get your coilovers from and what fit are they, HS ?.
  16. You earth it on the Kenwood, If you bought it new just ask where you bought it from. More than likely an earth I expect.
  17. How have you earthed it and is it good. What amp is it and what gauge wire have you used for the + feed, Have you connected the + feed directly to the battery via a fuse.
  18. I live 500 yds down the road from there and the firm I work for pick up from you. I am now driving a Mk2 silver Arosa, I'll keep a look out for you
  19. RichardS

    Coilovers

    Ok, I have had a reply back from the seller and although his english is better than my German I don't think he understands fully what I am asking. What I want to know is what is the difference with 6H and 6HS ?, Mine is a 6HS could I adapt the 6H to fit Anyone know of a cheap 6HS set up if not
  20. Yes it came with them, Saw it on Ebay and went up to Birmingham to view it, As you can tell I brought it back as well Have done some minor mods and plan on doing some more in the future
  21. Here's my new daily driver. Hope to get some coilovers for it soon.
  22. Just won some Arosa ones on ebay for £16
  23. Cardiff, I will post some pics later.
  24. RichardS

    Coilovers

    TA Technix, Are they any good
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.