Jump to content

Vwlup0

Members
 View Profile  See their activity

  • Posts

    362

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Vwlup0

  1. Vwlup0
    My mate got and bent the pipe. It's attached to the back box, it was only to see if I liked it, I'm doing a proper one on my next one so ill sort you out a step my step guide, the next one will probably be cutting the end off the back box to avoid bending it downwards to then bend it upwards.. It's like 12" long from the back box to the tip and 1 and a half inch wide, if you're near Northamptonshire I'd be happy to show you
  2. Vwlup0
    Not being patronising, but you could try setting up the sub via the back of the sub and the head unit?
  3. Vwlup0
    Just go on eBay and see what you can find. If you're on a budget go for ta technics coil overs Wheels is a personal preference.. Whatever floats your boat.. I wouldn't tint your windows yourself unless you have a steady hand to cut the lines for the heated rear window. So that would be a professional job. Hope this helps(:
  4. Vwlup0
    New update! Just added a redbull can on(; Pics on Instagram: olwal
  5. Vwlup0
    They'll look sweet, update me when they're done!
  6. Vwlup0
    I can't because mine is a 1L (; slowest lap record for me!
  7. Vwlup0
    Early start for me then!
  8. Vwlup0
    Don't:/
  9. Vwlup0
    I'll be at the pre-meet with two of my mates, 1 in a cooper s and the other in an old school mini(: Where is this pre-meet and time?
  10. Vwlup0
    Gorgeous car!(: my mate sold his mk3 on 243k and it was still going strong! They last forever
  11. Vwlup0
    Do you have the correct bolts? Reps are always tapered bolts, and all standard lupo's are rounded bolts. Just check that(:
  12. Vwlup0
    What wheels are you running?
  13. Vwlup0
    I had the same problem, they fit, just sit lower
  14. Vwlup0
    Will do mateSlight change.. He now has a mini. Slammed and all that(:
  15. Vwlup0
    Welcome!
  16. Vwlup0
    Yes
  17. Vwlup0
    Could be your driveshafts, coilovers, wheels.. I'd check that the wheels actually clear the coilovers, I ground off the back of my wheel front coilover:( 15mm spacers sorted it. I have the same problem, but it's my driveshaft where the car is so low. Then again it could be a wheel bearing or anything. Let me know how you get on(:
  18. Vwlup0
    Just make sure you re-torque/tighten the wheel nuts in about 30ish miles, the paint on the stud wholes will crack and will just need a torque(: 110nm
  19. Vwlup0
    My mate is following me up, but he's got a 6n2 facelift.. He could be an extra? Basically a big lupo
  20. Vwlup0
    What colour you going?
  21. Vwlup0
    (; Cheers for all the feed back, appreciate it, I'd really recommend doing one for anyone who is unsure
  22. Vwlup0
    Got some inch and a half piping, bent in, tack welded so you could move it about and get the right angle, then just weld it right up. And I had to jack my car right up to drill the hole.. Is this one of those caps?! Sort if like a trucker has?
  23. Vwlup0
    Yeah I drilled a 3mm hole for rain(: they look really different and turn heads..(:
  24. Vwlup0
    As I said you love it or hate it, personal preferance(: Cheers for the comments though guys(:
  25. Vwlup0
    Egg in the wall?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept