Keelan Posted January 3, 2014 Report Share Posted January 3, 2014 What are the wiring labels for base blocks as I'm having memory issues.I have a ripspeed dv740 (with the car)Also does anyone know how to use the coax wiring?What's the best way to wire in rear speakers? Quote Link to comment Share on other sites More sharing options...
RobG Posted January 4, 2014 Report Share Posted January 4, 2014 Quote Link to comment Share on other sites More sharing options...
Skezza Posted January 4, 2014 Report Share Posted January 4, 2014 Keelan, if you're having memory issues, you probably need to fit the standard VW wiring harness.ebay PC2-69-4 about £2.50 Quote Link to comment Share on other sites More sharing options...
DannyParanoid Posted January 9, 2014 Report Share Posted January 9, 2014 Could just need to swap the yellow and red wires on the harness between the radio and original vw connections over, some have bullet connectors for this, some (like a friends car that i had to add connectors in to) dont 1 Quote Link to comment Share on other sites More sharing options...
Skezza Posted January 9, 2014 Report Share Posted January 9, 2014 Could just need to swap the yellow and red wires on the harness between the radio and original vw connections over, some have bullet connectors for this, some (like a friends car that i had to add connectors in to) dontIt's not possible to swap them on some looms, so bullets are required. Quote Link to comment Share on other sites More sharing options...
Keelan Posted January 18, 2014 Author Report Share Posted January 18, 2014 I luckily have bullet connectors. But I used a small screwdriver to flatten the pin's barb and switched the two around. Now it's holding up good nicely.Thank you for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.