Martsmithy Posted January 20, 2013 Report Share Posted January 20, 2013 2004 arosa on g60 steels, going to put Jom coilovers on, the rears are on, but how low can you go on the front? As the g60's are 15s and I don't want any scrubbing or anything like that.. Any tell me how many threads to leave at the top on the front please? Quote Link to comment Share on other sites More sharing options...
MiiTCH-TDi Posted January 20, 2013 Report Share Posted January 20, 2013 Put them on around half way down on the coilover lower it down of its too low wind them up if ya want it lower lower them down simple Quote Link to comment Share on other sites More sharing options...
Lupo-Joe Posted January 20, 2013 Report Share Posted January 20, 2013 I believe I had two inches of thread left to wind down on the front and adjusters out on the rear. And no scrubbing.This was with 195/45/R15 tyres.Joe Quote Link to comment Share on other sites More sharing options...
Little Green Giant Posted January 20, 2013 Report Share Posted January 20, 2013 all depends on tyre choice Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted January 20, 2013 Report Share Posted January 20, 2013 Word it down until it scrubs, then wind it back up again until it stops, make sure the levels are correct and it has the correct rake, sorted Quote Link to comment Share on other sites More sharing options...
Martsmithy Posted January 20, 2013 Author Report Share Posted January 20, 2013 Cheers joe! I'm running the same tyres, ill wind the rears all the way down first and put the front about 4 inches from the top! Quote Link to comment Share on other sites More sharing options...
NexG Posted January 22, 2013 Report Share Posted January 22, 2013 Nice I'm thinking of getting some Jom's, I'm running on the standards with 55 profile tyres, i should get some decent low's? also, i had an issue when i lowered my old lupo where the exhaust used to bang on the ORB, will i have the same problem? Quote Link to comment Share on other sites More sharing options...
Martsmithy Posted January 27, 2013 Author Report Share Posted January 27, 2013 Whats oNice I'm thinking of getting some Jom's, I'm running on the standards with 55 profile tyres, i should get some decent low's? also, i had an issue when i lowered my old lupo where the exhaust used to bang on the ORB, will i have the same problem? What's the ORD mate? I'd get some joms Quote Link to comment Share on other sites More sharing options...
NexG Posted February 21, 2013 Report Share Posted February 21, 2013 sorry i meant ARB anti roll bar :/ silly me Quote Link to comment Share on other sites More sharing options...
JoeA Posted February 21, 2013 Report Share Posted February 21, 2013 Each car is slightly different tbh, never mind the age of the coilies affecting their ride height.Work your way down, there's no exact, thread counting science. Quote Link to comment Share on other sites More sharing options...
Martsmithy Posted February 23, 2013 Author Report Share Posted February 23, 2013 What's the difference if the coils are new/old joe? Quote Link to comment Share on other sites More sharing options...
JoeA Posted February 23, 2013 Report Share Posted February 23, 2013 (edited) As they wear in they settle and sit lower. Edited February 23, 2013 by JoeA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.