sharpelupo Posted September 20, 2012 Report Share Posted September 20, 2012 hi guys and girlslooked through the search and found loads of diff answers basicly my passanger electric window has stopped working but i can hear a click when i turn and put it down so is this the motor knackerd or the whole lot?cheers guys and girls Quote Link to comment Share on other sites More sharing options...
JoeA Posted September 20, 2012 Report Share Posted September 20, 2012 Koop knows his window ****. PM him Quote Link to comment Share on other sites More sharing options...
Lupo Fiasco Posted September 20, 2012 Report Share Posted September 20, 2012 Sharpe, the window mechanisim is probably at fault! Try hitting the door with your hand just below the internal door handle whilst operating the window switch and hopefully this should free the sliders that control the movement of the window!! The reason the window becomes lodged is because the grease that lubricates the runners is slowly washed away by continious washing detergents entering the door cavity... Best thing you can do is to use the window daily.. Hope this helps?! Quote Link to comment Share on other sites More sharing options...
Pete91 Posted September 20, 2012 Report Share Posted September 20, 2012 Sharpe, the window mechanisim is probably at fault! Try hitting the door with your hand just below the internal door handle whilst operating the window switch and hopefully this should free the sliders that control the movement of the window!!The ol' hit n hope technique. Never fails Quote Link to comment Share on other sites More sharing options...
sharpelupo Posted September 20, 2012 Author Report Share Posted September 20, 2012 Koop knows his window ****. PM him tryed to pm koop but says i cant said him a message :sSharpe, the window mechanisim is probably at fault! Try hitting the door with your hand just below the internal door handle whilst operating the window switch and hopefully this should free the sliders that control the movement of the window!! The reason the window becomes lodged is because the grease that lubricates the runners is slowly washed away by continious washing detergents entering the door cavity... Best thing you can do is to use the window daily.. Hope this helps?!i'll try this later is it possibly worth taking the door cards off and trying to re-grease the unit? Quote Link to comment Share on other sites More sharing options...
JoeA Posted September 20, 2012 Report Share Posted September 20, 2012 Ill link him the thread... Quote Link to comment Share on other sites More sharing options...
Koop Posted September 20, 2012 Report Share Posted September 20, 2012 You rang?Best delete some messages If it clicks the switch is fine, you're looking at a motor or regulator fault. Removing, greasing & refitting might work. I just replaced the regulator on mine as it had completely seized, it works now but it's a bit sticky & sluggish, I'd recommend a new motor & regulator from Lupoboz if you can't free it up. Quote Link to comment Share on other sites More sharing options...
Koop Posted September 20, 2012 Report Share Posted September 20, 2012 Check out this bad boyhttp://forums.clublupo.co.uk/index.php?showtopic=89966 Quote Link to comment Share on other sites More sharing options...
sharpelupo Posted September 20, 2012 Author Report Share Posted September 20, 2012 cheers koop great as always il try the old hit and hope tech if no luck il take it apart and try re-greasing if still no joy il have to get a new one Quote Link to comment Share on other sites More sharing options...
sharpelupo Posted September 20, 2012 Author Report Share Posted September 20, 2012 tryed the hit and hope but no joy just ended up hurting my hand so looks like im gona have to go with the next part and try and loosen it up, if not the joys of buying more things for the little lup Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.