sharpelupo Posted April 3, 2012 Report Share Posted April 3, 2012 hi guys taken my rear badges off but it has left an outline of the badges i bought some meguiars ultimate compound to try and get rid of them will this work if not any ideas of something better? iv used AG intensive tar remover to get rid of the stickey rubbish left Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted April 3, 2012 Report Share Posted April 3, 2012 Is it where its faded or because of contaminants on the surface? Quote Link to comment Share on other sites More sharing options...
sharpelupo Posted April 3, 2012 Author Report Share Posted April 3, 2012 think its where the boots faded but not noticable till i removed the badges Quote Link to comment Share on other sites More sharing options...
aaronhtid Posted April 4, 2012 Report Share Posted April 4, 2012 Tape up a square so the area your gonna be working on is inside the tape line so you have a really small set length and just attack the area with your applicator abd Megs UC. You might need to give it multiple hits. Quote Link to comment Share on other sites More sharing options...
gavinhendy Posted May 25, 2012 Report Share Posted May 25, 2012 and finish the area with something milder like lime prime to remove any swirls the UC may leave behind, i found UC left a lot of maaring on an astra vxr i corrected but then again the paint is very soft on vaux Quote Link to comment Share on other sites More sharing options...
vdublo Posted May 26, 2012 Report Share Posted May 26, 2012 i used a little hot water and a thin bit of laminate did the job then just polish up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.