blister Posted July 12, 2011 Report Share Posted July 12, 2011 1.0 lupoi have got my front coilovers wound right down to one thread left at the bottom! and i want to go lower what are my options? Quote Link to comment Share on other sites More sharing options...
Bickerton Posted July 12, 2011 Report Share Posted July 12, 2011 Get the bit that connects to the hubs removed and rewelded higher up the strut Quote Link to comment Share on other sites More sharing options...
blister Posted July 12, 2011 Author Report Share Posted July 12, 2011 didnt think of that is it common? Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted July 12, 2011 Report Share Posted July 12, 2011 Let down your tyres? Quote Link to comment Share on other sites More sharing options...
Benâ„¢ Posted July 12, 2011 Report Share Posted July 12, 2011 Let down your tyres?Where the **** is the like button Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted July 12, 2011 Report Share Posted July 12, 2011 TBH there arent many options other than welding.Or smaller wheels with lower profile tyres, that will get you lower to the ground. Quote Link to comment Share on other sites More sharing options...
blister Posted July 12, 2011 Author Report Share Posted July 12, 2011 ok guys brilliant think welding will have to be on the agender then,looking at upgrading to rear disc brakes so hopefully get hold of a rear beam to do some work on Quote Link to comment Share on other sites More sharing options...
jamesb16 Posted July 12, 2011 Report Share Posted July 12, 2011 take off the wheel and just run it on the discs? Quote Link to comment Share on other sites More sharing options...
blister Posted July 12, 2011 Author Report Share Posted July 12, 2011 forget even running on discs! best bet is just run on bottom arms and sump! Quote Link to comment Share on other sites More sharing options...
marcusgrant Posted July 12, 2011 Report Share Posted July 12, 2011 Where the **** is the like buttonahhh i remember when you used to get mugged off with scottys comments, now look at you embracing them!! Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted July 12, 2011 Report Share Posted July 12, 2011 Me and Ben have embraced on many an occasion, oiled up on a few too. :lol: Quote Link to comment Share on other sites More sharing options...
jamiea7x Posted July 12, 2011 Report Share Posted July 12, 2011 you can do what ben(LGG) has, wher the hub mounts to the coilover strut have have them cut off the coilover unit and rewelded back on firther up the strutcrude paint example Quote Link to comment Share on other sites More sharing options...
Bikerz Posted July 13, 2011 Report Share Posted July 13, 2011 You can get top mount lowering plates! Cheapest way, and you can even get 50mm ones! Quote Link to comment Share on other sites More sharing options...
blister Posted July 13, 2011 Author Report Share Posted July 13, 2011 like the idea of top mount lowering plates where do you get them? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.