.:hughesy:. Posted March 9, 2011 Report Share Posted March 9, 2011 does anyone have any advice on how to get the disc off? I cant get mine to budge tried everything i can think of. Any help would be appreciated.thanks Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted March 9, 2011 Report Share Posted March 9, 2011 Have you undone the screw? If yes, give it the good news with a hammer Quote Link to comment Share on other sites More sharing options...
.:hughesy:. Posted March 9, 2011 Author Report Share Posted March 9, 2011 Was going to do that, but whats the plastic ring around the hub infront of the disc for? Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted March 9, 2011 Report Share Posted March 9, 2011 Is it on aftermarket wheels? If so it will be a spigot ringit will come straight off. They get covered in crap so look like the are part of the hub - made that mistake before! Quote Link to comment Share on other sites More sharing options...
.:hughesy:. Posted March 9, 2011 Author Report Share Posted March 9, 2011 Possibly, got Cades Eros wheels on, will try to pry that off now thanks Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted March 9, 2011 Report Share Posted March 9, 2011 Just tap a thin screwdriver down the vertical side, all will be revealed! Quote Link to comment Share on other sites More sharing options...
Cooper_GTI Posted March 9, 2011 Report Share Posted March 9, 2011 Belt the back of the disc with a weighty hammer!If that doesnt work, hit it harder.If that doesnt work, use both hands.If that doesnt work, use a bigger hammer.If that doesnt work, use the bigger hammer with both hands.If that doesnt work, heat it up with oxyacetalyne and repeat the above steps. Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted March 9, 2011 Report Share Posted March 9, 2011 Cooper GTI evidently went to the same mechanical school as me Quote Link to comment Share on other sites More sharing options...
Mike_M Posted March 9, 2011 Report Share Posted March 9, 2011 (edited) Not being rude but your not inspiring me with confidence.......... Edited March 9, 2011 by Mike_M Quote Link to comment Share on other sites More sharing options...
.:hughesy:. Posted March 10, 2011 Author Report Share Posted March 10, 2011 Ive never had aftermarket wheels on my cars in the past and with the spigot ring not moving at all i didnt want to risk it being anything important, its better to check it out than having something expensive go wrong is it not? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.