lupotdiboy Posted June 2, 2008 Report Share Posted June 2, 2008 (edited) Rite, iv got my Lupo sat on 195/50/15s getting it dropped on 40mm springs tomorrow, until i can afford coileys, however in the mean time, i was having a little look on jetex, and i found this awesome looking exahust, now the only problem is it says its 4 an 1.4 or 1.7sdi??so would it fit on 1.4 tdi???link to the exahust- http://www.jetex.co.uk/website/jetex_exhau...luminised+Steelany advice or experience or any pics of this exahust on anyone lupo would be wicked cheers guys Edited June 2, 2008 by lupotdiboy Quote Link to comment Share on other sites More sharing options...
Taxi Adam Posted June 2, 2008 Report Share Posted June 2, 2008 on the site it says centre exit? im not totally sure but i thought centre exits on tdi's required a bit of cutting underneath?!not really experienced bout this but thought id chip in my two-penneth Quote Link to comment Share on other sites More sharing options...
lupotdiboy Posted June 2, 2008 Author Report Share Posted June 2, 2008 obviously cutting the bumper thats cool, dont mind that so much, its more the fitting to the cat etc??? Quote Link to comment Share on other sites More sharing options...
Taxi Adam Posted June 2, 2008 Report Share Posted June 2, 2008 i meant the spare wheel well. i know someone with a tdi and apparently he had to cut out some of it. Quote Link to comment Share on other sites More sharing options...
Tigzâ„¢ Posted June 2, 2008 Report Share Posted June 2, 2008 I have one on my 1.0It fits under the bumper, using a S bend pipe.Sounds cool, looks cool and its nice and easy to fit. Quote Link to comment Share on other sites More sharing options...
lupotdiboy Posted June 2, 2008 Author Report Share Posted June 2, 2008 I have one on my 1.0It fits under the bumper, using a S bend pipe.Sounds cool, looks cool and its nice and easy to fit.so did u buy an extra peice of pipe?? Quote Link to comment Share on other sites More sharing options...
Tigzâ„¢ Posted June 2, 2008 Report Share Posted June 2, 2008 Everything you need is included in the kit Quote Link to comment Share on other sites More sharing options...
veedub1955 Posted June 2, 2008 Report Share Posted June 2, 2008 (edited) Its listed as a TDI exhaust so if that fits your 1.0 Tigz would it fit my 1.4 Sand where did you mount the centre hanger to? Edited June 2, 2008 by veedub1955 Quote Link to comment Share on other sites More sharing options...
ash24 Posted June 2, 2008 Report Share Posted June 2, 2008 Hiya mate, I put in an order for one of these systems 3 weeks ago, I have now been told that Jetex do not have any in stock in the UK or in their warehouses in Germany. They also told me its not in production at the moment and when it is it would be coming from Sweden anyway. I have been told by Jetex now that it will be a minimum of 8-12 weeks before they are available again. Just a thought, unless you're prepared to wait a while! Quote Link to comment Share on other sites More sharing options...
Tigzâ„¢ Posted June 2, 2008 Report Share Posted June 2, 2008 The mounting points are all standard points.The only extra work is a hole and bolt through the spare wheel well to mount the tail pipe. Quote Link to comment Share on other sites More sharing options...
g-man85 Posted June 2, 2008 Report Share Posted June 2, 2008 I've got this on my 1.4 TDI. See this thread which I replied to help other owners who wanted this exhaust. Sounds nice on the TDI engines http://forums.clublupo.co.uk/index.php?sho...c=40261&hl=Here's what my rear looks like with the help of a reiger rear centre exit bumper Quote Link to comment Share on other sites More sharing options...
lupotdiboy Posted June 4, 2008 Author Report Share Posted June 4, 2008 I've got this on my 1.4 TDI. See this thread which I replied to help other owners who wanted this exhaust. Sounds nice on the TDI engines http://forums.clublupo.co.uk/index.php?sho...c=40261&hl=Here's what my rear looks like with the help of a reiger rear centre exit bumper cheers that looks awesome, i like the look of having it cut out of the bumper and just below hmmm not sure what i would do, but thanks for the info guys Quote Link to comment Share on other sites More sharing options...
g-man85 Posted June 7, 2008 Report Share Posted June 7, 2008 (edited) Nice to randomly bump into you today lupotdiboy Small world hey, but Lupo was looking very nice Should get some pics of it up on the readers ride if you haven't done so. Edited June 7, 2008 by g-man85 Quote Link to comment Share on other sites More sharing options...
lupotdiboy Posted June 11, 2008 Author Report Share Posted June 11, 2008 Nice to randomly bump into you today lupotdiboy Small world hey, but Lupo was looking very nice Should get some pics of it up on the readers ride if you haven't done so.ye i know was really random, my names Ross by the way lol, ye i would but i dont know how any chance u could pm me intructions how to do it Quote Link to comment Share on other sites More sharing options...
scoobydoo Posted June 11, 2008 Report Share Posted June 11, 2008 Its listed as a TDI exhaust so if that fits your 1.0 Tigz would it fit my 1.4 Sand where did you mount the centre hanger to?yeah straight onto the 1.4s also. i have one. sounds fantastic but i didn like the centre exit so after running it for ages i took it off and am making some modification to the backbox Quote Link to comment Share on other sites More sharing options...
g-man85 Posted June 13, 2008 Report Share Posted June 13, 2008 ye i know was really random, my names Ross by the way lol, ye i would but i dont know how any chance u could pm me intructions how to do it Yeah sure thing Ross; i'll give you some 'tips' Marc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.