Removing heat blower from arosa/lupo

[Thibault]

Hi all,

New to this I tried to find a manual can't seem to find one. 

The second my heat blower is on its way out I've taken the resistor out but can't get to the heat blower tried to remove the panel in front but it seems to be the connected to the whole dash.

Any advice on how to remove it without removing whole dash.

Many thanks

[Rich]

It is connected, but you can get the blower out without removing it.

Just loosen it a bit at a push.

[mk2]

I'm guessing you mean the blower motor, not heater matrix? You can get to the blower motor once you remove the trim covering the passenger footwell. It presses and twists out, a bit like a light bulb.

[Thibault]

Thank you I will try it tomorrow.

I am also looking to interchange a lupo gti Speedo however they are hard to get hold of.

I see that the Polo gti 6n2 dials look exactly the same. Is that the case can I use a polo this 6n2 Speedo.

[Rich]

I have one or two somewhere but not the binnacle.

[Thibault]

Thanks Rich.

Managed to get the blower out. Done some more research and found one with the plastic cover which will go perfect for mine. 

Thanks for your help I'm sure I will ask more questions as the project goes on.