Thibault

Forgot to mention the airbag light doesn't come off either.

Hi all, I changed the speedometer this week on my car from standard to polo gti. I have 3 lights showing abs, flashing handbrake with 3 beeps and oil flashes nonstop when car is running (oil & filter warer changed in last month) Before I changed speedometer it showed an abs fault but the vagcom I have used bluedriver doesn't seem to bring anything up concerning the abs light or the handbrake flashing light. It has shown up code p0171 which might make sense as previous owner took hose out to air intake silly person. My question is. could it be a residual information from previous car Speedo it came from or is it actual fault with my car. And is it a case that the vagcom reader I have is rubbish or is there more serious problem.

Thanks Rich. Managed to get the blower out. Done some more research and found one with the plastic cover which will go perfect for mine. Thanks for your help I'm sure I will ask more questions as the project goes on.

Thank you I will try it tomorrow. I am also looking to interchange a lupo gti Speedo however they are hard to get hold of. I see that the Polo gti 6n2 dials look exactly the same. Is that the case can I use a polo this 6n2 Speedo.

Hi all, New to this I tried to find a manual can't seem to find one. The second my heat blower is on its way out I've taken the resistor out but can't get to the heat blower tried to remove the panel in front but it seems to be the connected to the whole dash. Any advice on how to remove it without removing whole dash. Many thanks