henry.0112 Posted November 1, 2016 Report Share Posted November 1, 2016 Where's the best place to put axle stands on a lupo? Cheers Quote Link to comment Share on other sites More sharing options...
James_VW Posted November 1, 2016 Report Share Posted November 1, 2016 Rear - I pop them under the beam Front - under the subframe, were the wishbones connect (but not the actual wishbone) Quote Link to comment Share on other sites More sharing options...
henry.0112 Posted November 2, 2016 Author Report Share Posted November 2, 2016 Cheers James Quote Link to comment Share on other sites More sharing options...
cj1 Posted November 2, 2016 Report Share Posted November 2, 2016 I put the front either on the subframe, as James has said.. Or underneath the chassis rails at the very front of the floor. Depends on what I'm working on. As for the rear, the two jacking points are the best bet IMO, leaves lots of room to get to everything at the back of the car. I use the center of the rear beam to jack the back up. Quote Link to comment Share on other sites More sharing options...
Skezza Posted November 2, 2016 Report Share Posted November 2, 2016 There's a big bolt holding the wishbone to the subframe which I used to find quite convenient. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.