Jump to content

dmoffitt90

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by dmoffitt90

  1. Bump - 220 for the wheels, also include another set of centres, bolts to hold the centres on and key, so you will have 8 centre caps and all the relavent bolts etc Can even throw in a full set of locking wheel nuts
  2. I had similar issue with a leaking rear cylinder on a 1.0 Lupo as its a seal known to go on most cars, but I assume you will have discs on the back as its a gti. Sadly the lupo is sold now and I have a French tin can known as a 106 Rallye, might be back to VAG at some point though
  3. I have two great condition front Porsche Tombstones in Tan Leather going for cheap if your interested ?
  4. Im 99% sure its nothing to do with any handbrake sensor, if you look at your brake fluid level in the resevoir above the Master Cylinder you will find it is low and needs a top up, this will stop the light flashing on and off, you then need to find where your braking system is leaking from. Most likely a damaged brake flexi or leaking brake union.
  5. Yeah theyr'e really nice, you can see some water marks on the seat on the RHS but this has all been cleaned up, mighty comfy aswell
  6. Hi Guys no longer got the Loop so got some stuff to sell on, My Ronal R15 Wheels, freshly powdercoated and not been on a car, 14"x6", Lupo Centrebore, 57.1 and PCD 4x100 and ET38 if i remember so direct lupo fitment. Still hoping for close to £220 as theyre MINT ! Porsche 944 Tombstones, car had 28,000 miles on it when they were removed, had them on ebay at £180 with lots of interest but no serious offers, £160 as again theyre in great condition other than a deep scratch on the bottom next to the adjustment knob 1.5-2cm long roughly Will include the porsche runners to help conver the bases over, could make bases up at an extra cost i guess.
  7. Hi guys, not been posting on here alot as ive sold the loop, would anyone be interested in a set of porsche tombstone seats from an 1984 994 ? Will include the porsche runners as it make it easier to convert to vw bases, had them on ebay a while ago at £180 with alot of interest but no real offers, would take £160, and might sort some rails out for a extra. Theyre mint as theryv'e came from a car with 28,000 miles. Stil got my Ronal wheels that I got powdercoated at ESP in glasgow hiding in my cupboard, any interest at £250 ono ?
  8. You removed the hadbrake cable ? what about the two retaining washer/spring assemblies to release the shoes off ?
  9. You looking for the riv nuts that go in the b post ? I have a set of four from a lupo, make me an offer
  10. Im pretty sure the engine code is not ahb, i bought a 1 litre ALD engine and it had ahb stamped on it aswell, is the engine code not on the timing belt cover at all ?
  11. In the end i sold it for just £800 as i needed the space
  12. Missed somthing again, its at 87000
  13. Cash only as i'm just after buying a 106
  14. Hi, ive forgotten to add that im based in Glasgow
  15. 1999 Volkswagen Lupo I'm based near Glasgow For sale is my VW Lupo, the car is in good condition and just went through its MOT at the weekend with no advisories, Taxed til the end of July so ready to drive away. It has also just had a full wash, polish and wax so is looking well. The car is for sale due to change to somthing french car has not been used daily since March this year and is no longer needed. 87000 miles 1.0 Engine with recent timing belt change( done at 86,000 Miles) Clutch at 81,000 Miles Discs, Pads, Rear Brake shoes and Rear Cylinders within the last year Currently still got the BF Goodridge winter tyres on it as it has not been getting used daily but I also have 2x Normal Falken road tyres to go with it with 6mm tread. Low mileage engine and box so no tapping or whining. Door Check Straps changed, thanks to LupoBoz New VW clutch cable when clutch was done There is a small crack and mark on the rear bumper where it has been bumped into in a supermarket car park. Other than that its a very tidy car and the interior is in good condition. A full car HPI check is also available from when I purchased the car last year. Contact me dmoffitt90@hotmail.co.uk, pm me on here or Tel: 07521942704
  16. Hi also very interested, have cash waiting and can arrange a courier. Cheers David
  17. Hi Ben, I'm not sure if it will, also forgot to mention its spares or repares, it whining in 5th gear.
  18. No cat or front pipe it's just the engine and some of the ancillaries
  19. Hi, pm me on here or send an email to dmoffitt90@hotmail.co.uk if you want to cantact me. Based in Glasgow but can post no problem PICS below If the engine parts dont go they will be getting weighed in for scrap. Lupo engine and Gearbox, Engine code is ALD gearbox Code is ESY, have done 85000 miles, changed it over as the top end was ticking due to worn hydraulic tappets, gearbox was whining in 5th and the sump gasket had went, the engine was running fine and was no trouble to start but I had the offer of a low mileage engine and box and have split old engine for parts : Top Cover in good condition with all rubber seals present Cyclinder Head, with valves and Springs Camshaft and Pulley Block with crfankshaft, conrods, piston and flywheel Throttle Body and Inlet Manifold Oil Sump Oil Pickup Pipe Engine Mounts, Gearbox Mount, Alternator Bracket and Mount Water Pump in Good condition Gearbox-whining in 5th Cambelt Plastic Covers Coolant Supply Tubes Thermostat Fuel Rail including injectors Engine lifting brackets Various Bolts and Gaskets, Used long life spark plugs 2x 13" Wheel Trinms and 3x hub caps Crankshaft Pulley Oil Cap and Seal Clutch release bearing guide sleeve Clutch release bearing, only done a few thousand miles Coolant Temp Sensor Oil Temp Sensor Crankshaft Position Sensor Knock Sensor Captive Nuts for Pop out windows Parts can be paid for in beer or cash, only really looking to cover postage on most of this stuff and a few quid for the hassle of packing it all up. OZ Alloy wheels 14"x6" 4x100 Centrebore 57.1mm, these came with my car and are not needed 3 have kerbing marks,no craks or dents and are completely straight all centre caps present, would reccomend a refurb hence £30 collected Infinity 6x9 speakers, these are rated at 300W peak 100W rms and also have tweeter adjustment, in very good condition, £20 plus £5 posted
  20. I have the rear badge from a Passat i think, it fits inside the recess behind where your badge used to be £4 posted if you like
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.