Kez1990 Posted March 29, 2010 Report Share Posted March 29, 2010 can u get an induction kit for arosa 1.0s???cant find 1 anywere lol Quote Link to comment Share on other sites More sharing options...
AshArosa Posted March 29, 2010 Report Share Posted March 29, 2010 1.0L lupo induction kit should be the same.You can get these off ebay or any performance shop online.Just check the throttle body size/external diameter and you should be fine. Quote Link to comment Share on other sites More sharing options...
Clarkie Posted March 29, 2010 Report Share Posted March 29, 2010 ive got one in my cupboard, pm me if your interested Quote Link to comment Share on other sites More sharing options...
si_leeds Posted March 29, 2010 Report Share Posted March 29, 2010 Any normal cone filter will fit you might just need a reducer for the pipe, although their a whaste of time imo, specially on a 1.0 Quote Link to comment Share on other sites More sharing options...
G_Sus Posted March 29, 2010 Report Share Posted March 29, 2010 ive got one in my cupboard, pm me if your interestedHow much la?Got all the bits n that? Quote Link to comment Share on other sites More sharing options...
Oldey Posted April 1, 2010 Report Share Posted April 1, 2010 Got a new injection kit and filter on my 04 arosa. Doesn't really do much apart from annoy more people because its louder, look nice and knocked a five 10's of a second off my 1/4 mile time. You can get them really cheap off of amazon etc... picked up my K&N filter brand new for £25. Quote Link to comment Share on other sites More sharing options...
Bigfoot Posted April 4, 2010 Report Share Posted April 4, 2010 i hope youve taken the original filters out of the airbox otherwise your a complete tard lol.Get a reducer and oil breather filter to do the job properly Quote Link to comment Share on other sites More sharing options...
Oldey Posted April 4, 2010 Report Share Posted April 4, 2010 Yes all the original filters are out thank you. The whole engine block was stripped back and cleaned as this car when i got it was in terrible condition. Quote Link to comment Share on other sites More sharing options...
Emz Posted April 4, 2010 Report Share Posted April 4, 2010 I have a BMC CDA induction kit on my Sport, I would imagine they make them for other models also? Mine is for a Lupo GTi but same fitment Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted April 4, 2010 Report Share Posted April 4, 2010 i hope youve taken the original filters out of the airbox otherwise your a complete tard lol.http://www.106owners.co.uk/forums/showthread.php?t=68729&page=2 Quote Link to comment Share on other sites More sharing options...
JC AROSA Posted July 25, 2011 Report Share Posted July 25, 2011 hi uys i am also looking for an induction kit for my 52 plate (2002) 1.0 s any help would be grat i have looked online etc and effing confused if somebody could help or link 1 for me that would be great cheers guys Quote Link to comment Share on other sites More sharing options...
midzarosa Posted July 29, 2011 Report Share Posted July 29, 2011 oldey, that looks pointless. a whole 3bhp or whatever you get wow. Quote Link to comment Share on other sites More sharing options...
beska133 Posted October 1, 2011 Report Share Posted October 1, 2011 i can understand how pointless they are on a 1 litre without changing your outlet manifold, exhaust and possibly de-cat'ing it, and extreme re mapping, im i have a 1l arosa and im putting my k&n cone filter in tomorrow simply for laughs and i enjoy the roar it makes, more of the piss take of the local chavs and the simple saving im making on buying normal disposable air filtersso take that into consideration, when you service your car, it will cost you a tenner a pop for 2 disposable air filters, so in 2-3 years it pays for its self as you just wash and clean it,Also, it's been proven due to the 'better breathing' of a k&n air filter, at normal use, as gear changed are made lower and idling isn't so burdening, you end up saving more fuel Quote Link to comment Share on other sites More sharing options...
si_leeds Posted October 2, 2011 Report Share Posted October 2, 2011 Ten quid for a filter element? **** me you going halfords or somethin? I pay 3 quid lol Quote Link to comment Share on other sites More sharing options...
shabba45 Posted April 12, 2012 Report Share Posted April 12, 2012 I've noticed further up the feed somebody has put a cone filter on a 1.0L Arosa, i'm looking to do this myself (just because they look nice, no other reason. Do i just take the pipe off that's already on and then put the cone filter on or is there something else i need to do? Quote Link to comment Share on other sites More sharing options...
Chrisbee Posted April 12, 2012 Report Share Posted April 12, 2012 take the panel filters out of the original box, also you'll need a small filer for the breather pipe. Quote Link to comment Share on other sites More sharing options...
shabba45 Posted April 12, 2012 Report Share Posted April 12, 2012 Where are the panel filters? don't know much about cars? sorry Quote Link to comment Share on other sites More sharing options...
Chrisbee Posted April 12, 2012 Report Share Posted April 12, 2012 inside the engine cover, look in the how too section for how to remove it. Quote Link to comment Share on other sites More sharing options...
Adam R4 Posted April 12, 2012 Report Share Posted April 12, 2012 I made my own, it costs less and it's easier. 1 Quote Link to comment Share on other sites More sharing options...
shabba45 Posted April 12, 2012 Report Share Posted April 12, 2012 have you got a picture of your custom one? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.