lankys lupo Posted January 8, 2011 Report Share Posted January 8, 2011 hi allive been looking at getting some, Schmidt modern line 3ps split rims and I was wondering which would fit best on the lupo16x7.5"or 16x8" Quote Link to comment Share on other sites More sharing options...
Huw Pugh Posted January 8, 2011 Report Share Posted January 8, 2011 It'll depend on the offsets Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted January 8, 2011 Report Share Posted January 8, 2011 On a gti or not?And as Huw said, depends on offset, also what sorta look you going for? Tuck, flush, poke? Quote Link to comment Share on other sites More sharing options...
lankys lupo Posted January 8, 2011 Author Report Share Posted January 8, 2011 no gti its just 1.4 . a bit of poke if that is the same you have deadmetalthe offset for Size: 16x7.5" PCD/Offset: 4x100and the same for 16x8 Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted January 8, 2011 Report Share Posted January 8, 2011 Thats not the offset thats the diameter, width and pcd Quote Link to comment Share on other sites More sharing options...
lankys lupo Posted January 8, 2011 Author Report Share Posted January 8, 2011 well her is the link to the page I was looking at as i am have difficulty try to find what you mean by off set.http://www.rimstyle.com/products/detail/?category=alloy_wheels;type=schmidt_modern-line_3pc_hs;manufacturer=schmidt;model=13070;id=SCML3-HS-ID13070-D16-W80l80-P4BLA-El Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted January 8, 2011 Report Share Posted January 8, 2011 There is no offset/et on the web page Looks like the offset it gonna be pretty low, around the 20 mark.Your best bet od to try and contact the website and ask them what offsets they have. Quote Link to comment Share on other sites More sharing options...
lankys lupo Posted January 8, 2011 Author Report Share Posted January 8, 2011 thank you deadmetal. i have sent them an email asking them, im just wait for a reply and then i will let you know the offset. Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted January 9, 2011 Report Share Posted January 9, 2011 They may have a few barrel and dish options so might not have put the offset up because of that. Quote Link to comment Share on other sites More sharing options...
lankys lupo Posted January 10, 2011 Author Report Share Posted January 10, 2011 i just got a email back from rimstlye saying this ( Hi The best offsets would be 16x7.5 4x100 ET27 front, and 16x8.0 4x100 ET34 rear.) Quote Link to comment Share on other sites More sharing options...
heartagram Posted January 10, 2011 Report Share Posted January 10, 2011 If your not sure what your doing your best bet is to go for a higher offset and then lower it with a set of spacers to make them fit perfectly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.