tshirt2k Posted October 2, 2004 Report Share Posted October 2, 2004 Anyone know how to do this? My lights need adjusting but it's not up/down. They need to go left/right and the adjuster doesn't seem to do anything. Also i need to check if one of the bulbs have blown cos one day tit was on and the next ot wasn't. Already checked fuses (well can't really tell from the diagram on the back of the cover). They're ok . Just hope you don't have to stripthe front off the car. :? Quote Link to comment Share on other sites More sharing options...
Blackrat Posted October 2, 2004 Report Share Posted October 2, 2004 you gotta take the bumper off to get the headlight out.there is a ball and socket inside the headlight, that has prolly popped off, and thats why you cant get any adjustmenta new bulb is pretty £££ and you need to remove the back of the headlight to get it out Quote Link to comment Share on other sites More sharing options...
tshirt2k Posted October 3, 2004 Author Report Share Posted October 3, 2004 Thanks , But whats involved in taking the bumper off? Is it straight forward Quote Link to comment Share on other sites More sharing options...
Blackrat Posted October 3, 2004 Report Share Posted October 3, 2004 it is gonna be a pain in the ass if you not sure on what you doing, the problem is the headlight sprayers get caught on the bumper stiffener, but other than that its quite easyremove the grille and you will c three bolts holding the bumper on there, one more by each headlight and a few under the arches. there are also two bigger bolts behind the towing eye covers and a few under by the radiator section holding on the under traythen just give the bumper a good tug on each side sliding it in a forward motion and it unclips of the fenders, then wiggle to get the headlight sprayers out (make sure you disconnect the pipes) and its off Quote Link to comment Share on other sites More sharing options...
bossjohnc Posted October 3, 2004 Report Share Posted October 3, 2004 There are actually 2 adjusters on the Xenons if you look carefully - both white plastic cross heads. One does a left to right tilt, and the other does height. Just thought I'd say on the offchance that you missed it... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.