Deadmetal Posted January 31, 2009 Report Share Posted January 31, 2009 Hi, looking at getting Rh AD Cup alloys for a 1.0 loop.What offset would be best, ie flush with archesl, not rub etc, for 14's?Dubmeister have Et33 for 6j and 45 for ej7.And also what tire sizes would be best?Thnx for any help. Quote Link to comment Share on other sites More sharing options...
scoobydoo Posted January 31, 2009 Report Share Posted January 31, 2009 id go for the sevens. tbh on a 14 id try find a lower offset than 45 though. the lower the offset the bigger the dish yo!! Quote Link to comment Share on other sites More sharing options...
biggaz Posted January 31, 2009 Report Share Posted January 31, 2009 Good offset for good fitment with no scrubbing would be 35-40. 195/45/14's look nice or 194/40/14's are better.You could go a bit lower on the offset depending if your going to lower it and how much. Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted January 31, 2009 Author Report Share Posted January 31, 2009 (edited) Thanks Yer Im looking at lowering it around 60-80mm (coilies of course )Does any one know any where else that does The RH cup, or even if it comes diff offsets than they have one dubmeister? Edited January 31, 2009 by Deadmetal Quote Link to comment Share on other sites More sharing options...
simpo Posted January 31, 2009 Report Share Posted January 31, 2009 Chris on here runs 14x8's et 25 Brocks with 195 45's, no rubbing and he is low. Though the calipers need to be shaved with Brocks because of the wheel design. Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted January 31, 2009 Author Report Share Posted January 31, 2009 sweet, so I should have no probs thenThnx for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.