Jump to content

Bit urgent: Weitec suspension and 60mm lowering


jr
 Share

Recommended Posts

Just about to order a kit, but had a thought about 60mm lowering, will it be ok, or start the problem ive read about with the drifeshaft hitting the chassis rail ?

also any pics on the 60mm and 40mm kit to compare, cheers

jr

Link to comment
Share on other sites

What model?

Non-GTI's are fine til about 100mm down I think.

GTI's start to knock at about 55mm ish.

Wouldn't have thought you'd get any problems on a fixed drop, otherwise weitec wouldn't have made the kit that low.

Link to comment
Share on other sites

I can only speak from experience.

I measured my ground clearance to be 135mm standard.

I lowered it and measured the clearance from the same place to be 80mm.

I then had to raise it to 85mm clearance as the driveshaft was scraping.

I'm sure I read that Tigz's was okay til about 100mm down. But I did say 'about' and 'I think', which shows I was uncertain if that was the correct figure.

Edited by philip_wilkinson1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.