parv

cheers bud, i'll pm him now..

hi, need 2 front wishbones for lupo 1.4 75bhp.... thanks parv

no worries.. sold!

cheers sam... its brilliant... had no problems so far...

go to santa pods website... they have the events up on there... but 2012 events will probably be added in the beginning of next year...

i think £20 is quite cheap tbf.... and it'll fit the lupo tdi..

just a quick one guys..... i'm going to change it to £20... i just looked at the price brand new and they're like £30 quid lol i got this with the car so i didn't bother looking up the price.. and £30 quid sounded right to me but either way i'm not too fussed... £20 it is.. lol

based in milton keynes...

yer it fouled the water coolant tank but their was a bracket supplied to counteract that problem so that will be included aswell...

as far as i know the lupo and arosa chassis is the same (please don't quote me on it), so i'm thinking the strut tops are an equal length from one side to the other... i'm pretty sure it'll fit... i just looked at an arosa engine bay and it looks no different to a lupo's engine bay...

i'll get an individual one in a min...

hi everyone! got a lupo front strut brace if any ones interested.... want £30 quid for it... i don't need it as i've gone bias pedal box and the reservoirs are fouling the strut brace

building a garage... blimey! big job... good luck with that... when fitting it just make sure you get the right measurements as you'll be making 1 hole lol

sweet... you'll be happy when you get it... lol i used the brake pressure switch because there isn't a bracket to hold the original brake light switch... if you want to get one.. http://www.cbsonline.co.uk/product/Hydraulic_Stop_Light_Switch_M10x1_STSH thats the link where i got mine.. the master cylinders are not metric like the car itself... so when you make brake pipes up.. the master cylinders won't be m10 they'll be the other fitment... hope that helps... parv

the pictures dont even do them justice... lol they look and feel brilliant.. i completely missed the edition38 deadline but fingers crossed the car should be finished completely this week.. i reaally need to see yours... just looks so good.. parv

hi guys, the pedal box was from obpltd.com... they had an offer on... it feels absolutely brilliant.

update time... car is finished

ok then... the v5 says different.... but yer...

sport 75 bhp is different.... well mine were...

yer.. mk1 has 76mm and the mk2 has 94mm..

that is a shocking car... well done to him for surviving that long...

i'm not sure on the sport and gti hubs but i just wanted to be on the safe side and not get them and they were wrong so i modifie my wishbones to take mk2 golf ball joints and the mk2 hubs fit right in... which also means the wilwood kit should fit... but i'm in the pipeline of sorting proper motorsport type wishbones atm so it makes life easier for other people too.

if its got a pungent smell of fuel then you must have no problem with fueling.... (most likely) but how sure are you about the spark on piston 4?

i've got wilwoods on mine but i had to modify my wishbone to get mk2 golf hubs on and use a mk2 kit...

put it this way.. you have spark on that cylinder you say, so you might aswell check for fuel and eliminate small problems...