rough1 Posted January 17, 2018 Report Share Posted January 17, 2018 Hi. I Am having a nightmare trying to change my 1.4 16v 100bhp lupo starter motor. There must be a easy way instead of it been a complete b!%@h. Please help with advice. Thanks Quote Link to comment Share on other sites More sharing options...
Rich Posted January 17, 2018 Report Share Posted January 17, 2018 it's not that hard. remove the wires at the back, then remove three 13mm bolts and get wiggling. Quote Link to comment Share on other sites More sharing options...
rough1 Posted January 17, 2018 Author Report Share Posted January 17, 2018 What do i need to move to get to bolts. Is it better getting them from top or bottom of engine. Can't see where th bolts are. Thanks Quote Link to comment Share on other sites More sharing options...
Rich Posted January 17, 2018 Report Share Posted January 17, 2018 long things which feed through the gearbox, they're well visible from the top and if i remember correctly something plastic clips on them. Quote Link to comment Share on other sites More sharing options...
cj1 Posted January 18, 2018 Report Share Posted January 18, 2018 15 hours ago, rough1 said: What do i need to move to get to bolts. Is it better getting them from top or bottom of engine. Can't see where th bolts are. Thanks from the top - maybe easier without airbox. 30 min job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.