calumcostello1 Posted May 12, 2013 Report Share Posted May 12, 2013 Hi, im having a set of banded steels made, at the moment they're 13x4.5j et 38 and im banding the fronts to 7j and the rears to 8j and was wondering if they would fit or poke to much? Quote Link to comment Share on other sites More sharing options...
Pete91 Posted May 12, 2013 Report Share Posted May 12, 2013 Just take ruler and measure 2.5" (63.5mm) from the wheel on the front and 3.5" (88.9mm) from the wheel on the back. That will tell you exactly how they will poke mate. Quote Link to comment Share on other sites More sharing options...
calumcostello1 Posted May 12, 2013 Author Report Share Posted May 12, 2013 oh yeah lol thanks mate Quote Link to comment Share on other sites More sharing options...
scotty_82 Posted May 12, 2013 Report Share Posted May 12, 2013 Common sense !! Quote Link to comment Share on other sites More sharing options...
jamiea7x Posted May 13, 2013 Report Share Posted May 13, 2013 offsets is a bit low on such narrow wheels once the reach a normal width the offset will be realy low, once banded to 7j they will be near enough a zero offset so will probably be a bit poky at 7j never mind 8j Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.