100mm cv joint

[Weeredarosa]

I've got a pair of arosa sport hubs and need to know what cv joint I need to fit to enable me to go to 100mm inner joints.

I may be getting myself muddled up here. I'm fitting an o2a gearbox with 100mm flanges. Can you get an inner cv joint that will allow me to go from the 100mm flange to the standard shaft?

It's a 90mm setup from the hub to the gearbox flange

[Weeredarosa]

Can I use the inner flange from my 1.4mpi gearbox in the 02a gearbox to keep the 90mm setup?

[James827]

you can Probably change the Gearbox cups as they are the same gearbox code, so both Spung cups.

you could also Uske MK2 gti inner cvs if you wanted, they are 100mm i think.. (my GTD is)

[Weeredarosa]

And would this allow me to keep the standard hubs, cv joint and shaft?

It's a 20v conversion I'm attempting. I know I will need to cut one of the shafts, but was panicking about the inners

[James827]

i thought it was a sport setup ahah my bad, just change the inner CV's, my mates doing a 4 speed to 5 speed conversion on his caddy, and it was just easier to change the inner CV's over, as the cups have many different variations

[Weeredarosa]

Superb. I'll let the post know what I find.