Lupoluke69 Posted January 26, 2012 Report Share Posted January 26, 2012 I'm in the middle of removing my headlining and I got to the sun visor clip and can't get it off? How do I do it? Cheers. Quote Link to comment Share on other sites More sharing options...
treblet Posted January 26, 2012 Report Share Posted January 26, 2012 Very small screwdriver under the edge of the plastic cover and it pops off.You'll probably damage the cover though, it's almost impossible to get them off without damaging them or snapping them completely. Quote Link to comment Share on other sites More sharing options...
puggled Posted January 26, 2012 Report Share Posted January 26, 2012 I pushed up on the edge of mine and it twisted 90 degrees and then I could just pull it straight out.Though admittedly they'd been out before, when the car was new Arnold Clark had to repair it cos they dropped the transporter's upper deck on it :-o Quote Link to comment Share on other sites More sharing options...
Lupoluke69 Posted January 26, 2012 Author Report Share Posted January 26, 2012 done!!! Only took me an hour from start to finish i used the tool to take wheel trims offf.... not damaged at all!!! Quote Link to comment Share on other sites More sharing options...
My_Names_Buck Posted February 19, 2012 Report Share Posted February 19, 2012 Sorry to crash this thread but can somebody reccomend a way of removing the glue that sticks the cardboard on to the actual roof...? I've got as much cardboard off as I can but am now left with strips of very hard stubborn cardboard covered glue of some description, I've tried a heat gun, scraping but just can't move it! :/ Quote Link to comment Share on other sites More sharing options...
treblet Posted February 19, 2012 Report Share Posted February 19, 2012 Have you tried tardis on it? Quote Link to comment Share on other sites More sharing options...
puggled Posted February 20, 2012 Report Share Posted February 20, 2012 Would a toffee wheel work? Does a grand job after removing bump strips and badges. The glue might be too much for it though. Quote Link to comment Share on other sites More sharing options...
My_Names_Buck Posted February 21, 2012 Report Share Posted February 21, 2012 Have you tried tardis on it?I've not no, im tempted to maybe buy some though, anyone got any ideas if this will work?I think that the black glue maybe Urethane...? which so I've heard is near impossible to remove, can anyone enlighten me on this?Would a toffee wheel work? Does a grand job after removing bump strips and badges. The glue might be too much for it though.Mmmm I think the glue may be a bit to much for that, it is just solid on there :s lolSam. Quote Link to comment Share on other sites More sharing options...
Zulley Posted February 23, 2012 Report Share Posted February 23, 2012 Whats under it then? just metal roof? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.