aramil2003 Posted March 20, 2005 Report Share Posted March 20, 2005 Is there any way of getting the gamma head unit back in easily? I've took it out to fit a remote lead and RCA but when I slide it back in, it leaves about 1cm overhang and just wont go any futher... I think it might be becasuse of the wiring loom (being in the way) so is there any way of getting behind the dash and pulling the loom back as I push the HU back in (so there is no slack left to get in the way)...Or is this not the problem?Has anybody else had an experience similarto this? Quote Link to comment Share on other sites More sharing options...
tshirt2k Posted March 20, 2005 Report Share Posted March 20, 2005 If you have the little pocket below headunit. remove it and tidy wiring behind h/u then just push hard. H/u always seem a tight fit. Quote Link to comment Share on other sites More sharing options...
Tigz™ Posted March 20, 2005 Report Share Posted March 20, 2005 Theres a small plastic flap that sticks out slightly.It has a hole in, theres one in the top slot and one in the bottom.Its used for the tray to pop into.As you only need the bottom one, removeing the one behind the headunit give you abot an inch extra behind the headunit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.