lupo92 Posted October 14, 2011 Report Share Posted October 14, 2011 just tried to fit coilovers. where the bottom of the strut were the bolts go through is quit loose. does anybody know what position there ment to be set!thanks rhys Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted October 14, 2011 Report Share Posted October 14, 2011 Pull the top of the hub/brake disk out away from the car. This should give the front wheels minimal camber.Asuming you're talking about the fronts. Quote Link to comment Share on other sites More sharing options...
MikeW Posted October 14, 2011 Report Share Posted October 14, 2011 Hey mate,Not 100% sure what u mean by this, should bolt on fine, heres a pic of mine they're JOM, but basically the same as the TA's. Hopefully this pic will make things a bit clearer???? Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted October 14, 2011 Report Share Posted October 14, 2011 I think the question is in referance to the eliptical bolt holes in the coilovers to allow for camber adjustment. Quote Link to comment Share on other sites More sharing options...
Bickerton Posted October 14, 2011 Report Share Posted October 14, 2011 Fit em fairly straight and go to a place and get you camber set Quote Link to comment Share on other sites More sharing options...
lupo92 Posted October 14, 2011 Author Report Share Posted October 14, 2011 thanks for all the awnsers, pulled the top of the disk outwards to get camber right, however the tracking is toeing out really badly, more help greatly appreciated!!thanks rhys Quote Link to comment Share on other sites More sharing options...
Ell.s Posted October 14, 2011 Report Share Posted October 14, 2011 you need to have the camber and tracker properly set up by laser aligning them mate. Quote Link to comment Share on other sites More sharing options...
lupo92 Posted October 14, 2011 Author Report Share Posted October 14, 2011 ok no worries will get hat done tomorow then!thanks rhys Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted October 14, 2011 Report Share Posted October 14, 2011 What Ell said.After fitting coilovers you really need to get the tracing and camber set up properly.Pulling the top out is just a way to stop the tyres dying before you can get the car it tracked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.