yellowlennie Posted February 13, 2010 Report Share Posted February 13, 2010 for the past two days my indicators and hazards have been working on and off. sometimes its fine, other times they just flash really slow or the lights just come on and stay on. The lights and sound on my dash work but go slow too. i have absoulutely no idea why this is or how i can go about fixing it. any ideas? Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted February 13, 2010 Report Share Posted February 13, 2010 Either the stalks or relay. Does it work properly when you pres the hazard warning button? Quote Link to comment Share on other sites More sharing options...
yellowlennie Posted February 13, 2010 Author Report Share Posted February 13, 2010 Either the stalks or relay. Does it work properly when you pres the hazard warning button?nope, they come on and either stay on or flash really slowly. im confused as to why it only does it every now and then though. Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted February 13, 2010 Report Share Posted February 13, 2010 Thats electrics for you! I would guess as the relay being at fault Quote Link to comment Share on other sites More sharing options...
yellowlennie Posted February 13, 2010 Author Report Share Posted February 13, 2010 Thats electrics for you! I would guess as the relay being at faultace, i'll try and get it looked at. Any idea where i can find the relay? Quote Link to comment Share on other sites More sharing options...
nfbr Posted February 14, 2010 Report Share Posted February 14, 2010 Replace the Hazard warning switch. As far as I am aware the Relay is built into this!It's a mega common problem on the TT's which is nearly always rectified with a new Hazard Switch! Quote Link to comment Share on other sites More sharing options...
electricpanda Posted February 14, 2010 Report Share Posted February 14, 2010 Sorry to hijack thread. Mine had been making a really annoying clicking noise, all the relays are fine. Some people said change stalks but if I hold the hazard light half way down it stops the noise. Could it be the button? If so How do I remove it and put a new one on? Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted February 14, 2010 Report Share Posted February 14, 2010 If it clicks normally when you press the hazard button then its the stalks that are knackered Quote Link to comment Share on other sites More sharing options...
nfbr Posted February 14, 2010 Report Share Posted February 14, 2010 Sorry to hijack thread. Mine had been making a really annoying clicking noise, all the relays are fine. Some people said change stalks but if I hold the hazard light half way down it stops the noise. Could it be the button? If so How do I remove it and put a new one on?You have to remove the radio surround panel that goes up the dash to to get to it if I recall correctly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.