Piratefleet Posted January 19, 2009 Report Share Posted January 19, 2009 How do you remove the standard grill on the Lupo?I see there are star screws which hold it in but i can't get a screwdriver in at a good enough angle to unscrew them....Any advice would be great Quote Link to comment Share on other sites More sharing options...
tomnotrevo Posted January 19, 2009 Report Share Posted January 19, 2009 Bend it forward very carefully is what i did, and use torx bits if you have them... screwdriver would probably just round them off and then it'll be hell getting it off with out snapping it all. I managed to get my grille out like that and nothings broken =D Quote Link to comment Share on other sites More sharing options...
aarghbee Posted January 19, 2009 Report Share Posted January 19, 2009 Use a star screwdriver bit. I did mine this weekend. Undo the two screws on top and take the bottom grille piece off. I had to take the indicators off too because there's a clip on my new grille that slots in there. The rest are normal clips you can just pull out/push in. Quote Link to comment Share on other sites More sharing options...
Piratefleet Posted January 19, 2009 Author Report Share Posted January 19, 2009 Great! thanks for the advice both of you! =] Quote Link to comment Share on other sites More sharing options...
aarghbee Posted January 30, 2009 Report Share Posted January 30, 2009 Not meaning to hi-jack your thread or anything but this may help you also. Has anyone else had trouble fitting that semi circular bonnet piece? I really don't think mine fits. Any ideas/suggestions on how to make it look half decent before I get it smoothed and sprayed? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.