pedro2682

Plugs and Leads?

I have spent a small fortune and still had a misfire, turned out to be a burnt exhaust valve.

Require a passenger door. West Scotland.

Never got it scanned from vcds, got a cheap code reader. Emissions are perfect now thanks to Weslangdon for the cat cleaner idea. The reader gave me 301, 351, 352. Misfire cyl 1 & 2 and coil pack. I only bought the coil pack last year.

Vag Com Dignostics systems.

Sorry to sound so "dumb", but what is vcds. Temp sender has now been ordered. Thanks.

Check your pedal box.

And my bad spelling....Sorry.

Please accsept my apologies... Sorry.

Nice one...

Right AND !!!!

I Thank You.......... New Air Filter, Post Lambda Sensor fitted, Codes Reset.................... !!!!!STILL MISFIRING!!!!!

Air/Fuel mismatch in the air filter ?

Got "Cat cleaner", pre cat Lamba sensor and a new MAP sensor as they seem to be all related some way or other. Do I replace the parts before, during or after using the cleaner. Cheers :-)

MOT done today, and it failed on emissions. Done all the usual EGR, plugs, leads, coil pack, etc etc. Tester says its dumping a siht load of fuel. Lambda probe maybe?, what's the average cost for a dignostics test. Cheers.

I have the same issue's, I've replaced Leads, plugs, coil pack. Cleaned EGR valve and compression tested with no avale. I have also had it on a cheap dignostics plug in and it couldn't find it, but if worked fine with my brothers Seat and Polo. Time to bring a hammer out to see if that will fix it x-(

YES !!

They are the "C" spanners, one large one small. They are used to lock the height adjusters, two "thin" nuts with location slots in them. Get the height you desire and place the large one on the top nut and the small on the bottom and tighten pushing in the opposite direction. Its more "locking" nuts but hold the springs into position.

The dreaded pedal box failure. Is your clutch pedal down further than the brake?, if so you need it welded or replaced, or your box is pooped

Does anyone have the sizes for these plates?

Holy Brown Stuff.

EGR valve, Coil Pack, Leads and plugs.

Welcome, im a newish member too, this forum is great for info. Check out the "How to" section, its got everything you need on it. Can or have you tried to "bend" your window frame back, with the glass down.

I had the stock rears, tinted them "lightly" and thought it was "Neddy". Got hold of Lupo one's and used the "How to" guided to fit them. Thousand times better looking in my own opinon and very easy to change over if you are going too.

Be on here snopping around. Must give you's who do the "How to" a massive THANK YOU for them, they have helped me with Lupo rear lights, peddle box, egr valve. Your guides have been spot on alway. Cheers. Pedro, 1.0 S Arosa. North Ayrshite.