maddison

I think the price is fair

1.4 16v Auto petrol Lupo 73500k and rising on the clock, but 32k engine fitted this winter lowered on fixed springs - 55mm front -40mm rear Classic VW alloys, Fondmetal in satin black with 195/45/15`s (will include standard 13" black steelies if wanted - or knock £200 off the price and keep the Fondmetals and fit the steels) apart from the springs and wheels its bog standard Electric windows, central locking, power steering, twin airbags engine is as sweet as a nut and low milage, Auto gearbox drips a couple drips of oil when you pull up...very annoying, dont know whether i have overfilled it...or its more terminal, the box however works just as it should, up and down all gears fine, drops down when floored and picks up fine with no slip....was fine before the engine change with the tyres and coils, the ride is Firm being an Auto, the car is like a little go-kart on rails...a right hoot 12 year old, but very nice little car - i`m currently doing 300 mile per week commute in it with no issues (apart from leaving a stain wherever i park...nowt new there then, just like my bus) located in Wingate County Durham £1350 (£1150 on steelies)

bugger, i`m in county durham too - wingate...and would have given you the asking price and picked them up let me know steve 07725069567

do you still have this please

do you know what drop these give, is it 40mm ?

whats happening fella ? these sold ?

head cams and followers sold honortse@aol.com for paypal as a gift and pm me your address you wanting the whole manifold and cat or just the lambda ?

are they sold, get in touch if you want me to come and collect them

PM or text me your address and i`ll come collect them on tuesday - are you around during the day or is evening better ? 07725069567 ta

no-one wnat anything before i ebay / skip it ?

is the sponge knackered in the drivers bolster...or have you just have something stood on it, looks a bit flat very interested by the way, if you could answer that question for me ;-)

all parts located in Wingate County Durham for collection, can arrange courier for everything at your expense...or you can arrange on your own behalf if you prefer All will go on ebay next week, but thought i`d offer them here 1st 1.4 16v AHW head complete with all valves etc, none bent, all thread good, ready to bolt on £100 set of 16 hydraulic cam followers, done about 10 miles from new £40 1.4 AHW block, all the pistons look good, but end one does have side movement, so suspect bearins are shot, may need rebuild, may just need new shells ?? £50 prefer collection only, but will arrange pallet at your expence inlet fanny mould with injectors etc.... £20 Plastic cover £7.50 main engine harness - nothing cut - from APE £10 header manifold with cat and lambda (from APE enfine) £25 Throttle body fro electic throttle APE £30 EGR from APE £40 water pipes from end of head, no cracks or deteriation APE £10 alternator harness £5 rocker and cams angle drinder mark where i removed a stubborn nut - 1 lobe has some wear - coilpack NOT included £25 coil pack - works nice £15 enginey mount bit £5 airbox £5 auto gearbox 68k £150

thanks, thats what i figured would be the easiest solution

just swapped the engine and box in my lup, the old engine had a cable operated accelorator that attached to the back of the throttle body / carb the replacement engine doesnt have the cable bit on the back of the throttle body, do some lupos have some kind of electronic accelorater instead of a cable throttle ?????? was gonna just swap the throttle body over, but the plugs are different, so may potentailly have to swap the complete engine harness form the old engine i guess ??

bonkers isnt it, I recently sent off 4 wheels and had 3 returned cos they couldtn find the address.....how the **** do they lose a wheel thats strapped to another one ??? I reckon there is some ****er who works in the courier depot with a real nice lupo