lupotyler Posted May 31, 2013 Report Share Posted May 31, 2013 hi ive got a set of ta technix coilovers on my lupo the front is fine just i dont think the rear will be low enough, ive taken the adjuster rings out, is it possible to take the coil out ? Quote Link to comment Share on other sites More sharing options...
lupotyler Posted May 31, 2013 Author Report Share Posted May 31, 2013 heres a picture Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted May 31, 2013 Report Share Posted May 31, 2013 Take the coil out? You mean the spring? No, don't do that, ever.Get custom made springs, they cost about £50 from demon tweeks. Quote Link to comment Share on other sites More sharing options...
lupotyler Posted May 31, 2013 Author Report Share Posted May 31, 2013 got some 15x7 bbs on 165 50 15s what size you think 80mm ? Quote Link to comment Share on other sites More sharing options...
Pete91 Posted May 31, 2013 Report Share Posted May 31, 2013 In order of pikeyness; custom spring, remove adjuster, cut some coils.Don't take the spring out cos you'll be riding on the shock alone haha.Not sure what you mean by 80mm? Go for a dampening of 170lbs/inch, diameter of 2.25" (if you're keeping the adjusters in I'd go for 2.5" so it clears it easier) and a length of whatever tickles yer pickle. I went for 6" and it got some decent lows. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.