gernster Posted March 11, 2013 Report Share Posted March 11, 2013 The interior light doesnt work on the arosa - at all. I've checked the fuse and thats fine, but there is a residual voltage in the wires, about 0.7v so reckon the relay might be at fault (wish id known while the dash was out!) My polo manual has it down as relay 20, but is that right and will it be written on the relay? I'm assuming it's on the bank behind the fuse box?Anyone done this before? Quote Link to comment Share on other sites More sharing options...
electricracer Posted March 11, 2013 Report Share Posted March 11, 2013 contriol for the interior light is from the convience module large black box behind the fuse box if your part no is 1co962258ab i have spare one here Quote Link to comment Share on other sites More sharing options...
gernster Posted March 11, 2013 Author Report Share Posted March 11, 2013 Ah right, I've got a spare one from my breaker. I thought that was the central locking module? Quote Link to comment Share on other sites More sharing options...
gernster Posted April 1, 2013 Author Report Share Posted April 1, 2013 (edited) to close this out, the live feed wire had a break in it down in the drivers footwell.The power for the light comes straight from fuse 10, then there are two earths. one for the manual operation and the other through the convenience module to control when the light comes on when the doors are opened/ ign on and off, doors unlocked etc: Edited April 1, 2013 by gernster Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.