ElZ 16v Posted October 19, 2012 Report Share Posted October 19, 2012 I have removed helpers allround wound it right the way down and i think its bottoming out as in piston bottoming out so is quite bouncy.. Is there any way around this other than putting helpers back or winding it up? Also the coilover has this extra adjuster ring on and the base of the coilover can be extended/taken off but i dont know what its for? If i extend the base of the coilover will that allow for the piston to move more?!Said carAny help is welcomed!Cheers Quote Link to comment Share on other sites More sharing options...
Owen33 Posted October 25, 2012 Report Share Posted October 25, 2012 Will be bouncy because its jut running on the bumpstops. chances are if you can get you hand up will car is on ground and wiggle the springs, you'll find there probs not even doing anything Quote Link to comment Share on other sites More sharing options...
Owen33 Posted October 25, 2012 Report Share Posted October 25, 2012 as for the bottom 'adjuster' it looks like its jut welded on to have somewhere to put another c spanner round to resist against moving the adjusters Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.