DanSN117 Posted June 14, 2011 Report Share Posted June 14, 2011 Long.Basically its stopped going into second and third gear, kind of. It goes in maybe once in every 10 times. First, third and fifth are fine but it struggles to go into second and third. Its like something is stopping it from going in fully. If i slot it into fourth, it will go halfway into its gaitor if you will. Half the time it will engage a gear (just about) and give me drive, but the other half of the time it will grind and not give me any drive (the same it would do if i wasnt using a clutch)Any idea, the father figure thinks its the linkage needing adjust, but may it be more?Any replies will be appreciated. Quote Link to comment Share on other sites More sharing options...
DanSN117 Posted June 14, 2011 Author Report Share Posted June 14, 2011 Disregard this post, fixed it, lol. Quote Link to comment Share on other sites More sharing options...
Defcon5 Posted June 14, 2011 Report Share Posted June 14, 2011 What did you do? Quote Link to comment Share on other sites More sharing options...
DanSN117 Posted June 14, 2011 Author Report Share Posted June 14, 2011 A piece of the loom had come unclipped and was stopping the selector from moving in the direction it should. It had placed itself between the selector arm and a hose.Whoops, in my defense i hadn't unclipped the loom piece. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.