JiMMy BiZ Posted September 11, 2009 Report Share Posted September 11, 2009 i want the back of my car to look smooth so can anyone tell me how to remove the back wiper Quote Link to comment Share on other sites More sharing options...
Clarkie Posted September 11, 2009 Report Share Posted September 11, 2009 really easy mate, take the cover off the wiper bolt, and remove the inside of the boot, the motors held on by about 6 10mm bolts and then there is a main bolt holds the wiper on from the outside. unplug the motor and remove the washer pipe and should just fall straight outget a little grommet from halfords for 1.49 and happy dayz Quote Link to comment Share on other sites More sharing options...
JiMMy BiZ Posted September 11, 2009 Author Report Share Posted September 11, 2009 really easy mate, take the cover off the wiper bolt, and remove the inside of the boot, the motors held on by about 6 10mm bolts and then there is a main bolt holds the wiper on from the outside. unplug the motor and remove the washer pipe and should just fall straight outget a little grommet from halfords for 1.49 and happy dayznice one ill give it a try Quote Link to comment Share on other sites More sharing options...
Mike_M Posted September 11, 2009 Report Share Posted September 11, 2009 There are only 3 bolts holding the wiper not 6 to the body and when you remove the water pipe.........remember to block it up with a rubber gromit and sealit with electrical tape as I have done other wise if you accidently turn it on........a wet boot is made Quote Link to comment Share on other sites More sharing options...
jcarroll Posted September 14, 2009 Report Share Posted September 14, 2009 I put a screw in the end of the pipe and mine and its fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.